Integration of tungsten layers for the mass fabrication of WO3-based pH-sensitive potentiometric microsensors - LAAS - Laboratoire d'Analyse et d'Architecture des Systèmes Accéder directement au contenu
Article Dans Une Revue Sensors and Actuators B: Chemical Année : 2015

Integration of tungsten layers for the mass fabrication of WO3-based pH-sensitive potentiometric microsensors

Résumé

(W/WO3 –Ag/AgCl) and (Pt/IrO2 – Ag/AgCl) potentiometric microdevices were developed for pH measurement in liquid phase using a (Pt – Pt – Ag/AgCl) electrochemical microcells (ElecCell) silicon-based technological platform. A special emphasis was placed on the mass fabrication of the W/WO3 microelectrode using sputtering deposition and oxygen plasma processes. Compared to the Pt/IrO2-based one, the W/WO3-based microelectrodes showed lower performances regarding the pH measurement. Nevertheless, since W/WO3 microelectrodes yielded quasi-Nernstian sensitivity (around 55 mV/pH) in the [2-12] pH range, tungsten oxide WO3 can be considered as a good candidate for the mass fabrication of pH microsensors using silicon technologies, even if important temporal drift (at least 6 millivolts per hour) and high hysteresis (around 50 mV) were also evidenced.
Fichier principal
Vignette du fichier
manuscript_S&A_ElecCell_pH_vf accepté.pdf (882.32 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01399777 , version 1 (20-11-2016)

Identifiants

Citer

Ahmet Lale, Aliki Tsopela, Aurélie Civélas, Ludovic Salvagnac, Jérôme Launay, et al.. Integration of tungsten layers for the mass fabrication of WO3-based pH-sensitive potentiometric microsensors. Sensors and Actuators B: Chemical, 2015, Sensors and Actuators B, 206, pp.152 - 158. ⟨10.1016/j.snb.2014.09.054⟩. ⟨hal-01399777⟩
227 Consultations
301 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More