P. E. Pounds, D. R. Bersak, and A. M. Dollar, Grasping from the air: Hovering capture and load stability, pp.2491-2498, 2011.

N. Michael, J. Fink, and V. Kumar, Cooperative manipulation and transportation with aerial robots, Autonomous Robots, vol.30, issue.1, pp.73-86, 2011.

M. Fumagalli, R. Naldi, A. Macchelli, F. Forte, A. Q. Keemink et al., Developing an aerial manipulator prototype: Physical interaction with the environment, IEEE Robotics Automation Magazine, vol.21, issue.3, pp.41-50, 2014.

C. Korpela, M. Orsag, T. Danko, B. Kobe, C. Mcneil et al., Flight stability in aerial redundant manipulators, pp.3529-3530, 2012.

G. Hunt, F. Mitzalis, T. Alhinai, P. A. Hooper, and M. Kovac, , pp.4493-4499, 2014.

S. Kim, H. Seo, and H. J. Kim, Operating an unknown drawer using an aerial manipulator, pp.5503-5508, 2015.

T. Bartelds, A. Capra, S. Hamaza, S. Stramigioli, and M. Fumagalli, Compliant aerial manipulators: Toward a new generation of aerial robotic workers, IEEE Robotics and Automation Letters, vol.1, issue.1, pp.477-483, 2016.

H. N. Nguyen, S. Park, and D. Lee, Aerial tool operation system using quadrotors as rotating thrust generators, 2015 IROS, pp.1285-1291, 2015.

H. Seo, S. Kim, and H. J. Kim, Aerial grasping of cylindrical object using visual servoing based on stochastic model predictive control, Robotics and Automation (ICRA, p.63626368, 2017.

D. R. Mcarthur, A. B. Chowdhury, and D. J. Cappelleri, Design of the i-boomcopter uav for environmental interaction, 2017 IEEE International Conference on Robotics and Automation (ICRA), pp.5209-5214, 2017.

H. W. Wopereis, J. J. Hoekstra, T. H. Post, G. A. Folkertsma, S. Stramigioli et al., Application of substantial and sustained force to vertical surfaces using a quadrotor, 2017 IEEE International Conference on Robotics and Automation (ICRA), pp.2704-2709, 2017.

A. Franchi and A. Mallet, Adaptive closed-loop speed control of bldc motors with applications to multi-rotor aerial vehicles, 2017 IEEE International Conference on Robotics and Automation (ICRA), pp.5203-5208, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01476812

P. Sanchez-cuevas, G. Heredia, and A. Ollero, Characterization of the aerodynamic ground effect and its influence in multirotor control, International Journal of Aerospace Engineering, vol.2017, 2017.

M. Ryll, G. Muscio, F. Pierri, E. Cataldi, G. Antonelli et al., 6D physical interaction with a fully actuated aerial robot, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01476814

C. M. Korpela, M. Orsag, and P. Y. Oh, Towards valve turning using a dual-arm aerial manipulator, IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.3411-3416, 2014.

A. Suarez, G. Heredia, and A. Ollero, Physical-virtual impedance control in ultralightweight and compliant dual-arm aerial manipulators, IEEE Robotics and Automation Letters, vol.3, issue.3, pp.2553-2560, 2018.

G. Heredia, A. E. Jimenez-cano, I. Sanchez, D. Llorente, V. Vega et al., Control of a multirotor outdoor aerial manipulator, pp.3417-3422, 2014.

F. Ruggiero, M. Trujillo, R. Cano, H. Ascorbe, A. Viguria et al., A multilayer control for multirotor uavs equipped with a servo robot arm, pp.4014-4020, 2015.

A. Santamaria-navarro, P. Grosch, V. Lippiello, J. , and J. Andradecetto, Uncalibrated visual servo for unmanned aerial manipulation, IEEE/ASME Transactions on Mechatronics, vol.22, issue.4, pp.1610-1621, 2017.

E. Cataldi, G. Muscio, M. Trujillo, Y. Rodriguez, F. Pierri et al., Impedance control of an aerial-manipulator: Preliminary results, 2016.

T. Tomic, C. Ott, and S. Haddadin, External wrench estimation, collision detection, and reflex reaction for flying robots, IEEE Transactions on Robotics, issue.99, pp.1-17, 2017.

G. Muscio, F. Pierri, M. Trujillo, E. Cataldi, G. Antonelli et al., Coordinated control of aerial robotic manipulators: theory and experiments, IEEE Transactions on Control Systems Technology, 2017.

S. Moe, G. Antonelli, A. Teel, K. Pettersen, and J. Schrimpf, Set-based tasks within the singularity-robust multiple task-priority inverse kinematics framework: General formulation, stability analysis and experimental results, Frontiers in Robotics and AI, vol.3, p.16, 2016.

M. Kim, R. Balachandran, M. D. Stefano, K. Kondak, and C. Ott, Passive compliance control of aerial manipulators, Submitted to Intelligent Robots and Systems (IROS), 2018.

J. Artigas, M. D. Stefano, W. Rackl, R. Lampariello, B. Brunner et al., The oos-sim: An on-ground simulation facility for on-orbit servicing robotic operations, pp.2854-2860, 2015.

J. J. Abbott, P. Marayong, and A. M. Okamura, Haptic virtual fixtures for robot-assisted manipulation, Robotics research, pp.49-64, 2007.

F. Abi-farraj, N. Pedemonte, and P. R. Giordano, A visual-based shared control architecture for remote telemanipulation, Intelligent Robots and Systems (IROS), pp.4266-4273, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01355785

M. Karrer and M. Chli, Towards globally consistent visual-inertial SLAM for collaborative aerial navigation, Proc. of the IEEE Int. Conf. on Robotics & Automation (ICRA), 2018.

J. Zhang and S. Singh, LOAM: Lidar odometry and mapping in realtime, Robotics: Science and Systems Conference, 2014.

R. Mur-artal, J. Montiel, and J. Tardós, ORB-SLAM: A versatile and accurate monocular SLAM system, IEEE Trans. on Robotics, vol.31, issue.5, pp.1147-1163, 2015.

A. Pumarola, A. Vakhitov, A. Agudo, A. Sanfeliu, and F. Morenonoguer, PL-SLAM: Real-time monocular visual slam with points and lines, Proc. IEEE Int. Conf. Robotics and Automation, pp.4503-4508, 2017.

M. Villamizar, J. Andrade-cetto, F. Moreno-noguer, and A. Sanfeliu, Boosted random ferns for object detection, IEEE Trans. Pattern Anal. Mach. Intell, 2017.

A. Amor, A. Ruiz, F. Moreno-noguer, and A. Sanfeliu, On-board real-time pose estimation for uavs using deformable visual contour registration, 2014 IEEE Int. Conf. on Robotics and Automation, pp.2595-2601, 2014.

J. Thomas, G. Loianno, J. Polin, K. Sreenath, and V. Kumar, Toward autonomous avian-inspired grasping for micro aerial vehicles, Bioinspiration & Biomimetics, vol.9, issue.2, p.25010, 2014.

B. Yüksel, G. Buondonno, and A. Franchi, Differential flatness and control of protocentric aerial manipulators with any number of arms and mixed rigid-/elastic-joints, 2016 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp.561-566, 2016.

M. Tognon, E. Cataldi, H. A. Chavez, G. Antonelli, J. Cortés et al., Control-aware motion planning for task-constrained aerial manipulation, IEEE Robotics and Automation Letters, vol.3, issue.3, pp.2478-2484, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01704127