. Bibliographié-?-articles,

Q. Y. Tong and U. Gosele, Semiconductor wafer bonding. Science and technology, 1999.

C. Ventosa, Mécanismes mis en jeu dans le collage direct de surfaces hydrophiles, 2009.

P. Gueguen, Etude des mécanismes mis en jeu dans le collage direct du cuivre. Application a l'integration-3D de circuits, 2010.

F. Baudi, Contribution à l'étude des phénomènes mis en jeu par le collage direct à basse température des couches métalliques et oxydes métalliques. Thèse de doctorat de l'université Joseph Fourier : spécialité matériaux, mécanique, génie civil et électrochimie, 2014.

Y. Beilliard, Étude de l'intégration du collage direct cuivre/oxyde pour l'élaboration d'une architecture 3D-SIC, 2015.

D. Grierson and K. Turner, Characterization of Hysteresis of Surface Energy in Room-Temperature Direct Bonding Processes, The Electrochemical Society Trans, vol.33, pp.573-580, 2010.

G. Wallis and D. I. Pomerantz, Field Assisted Glass-Metal Sealing, Journal of Applied Physics, vol.40, issue.10, pp.3946-3949, 1969.

C. D. Tudryn, Characterization of anodic bonding, 2004.

A. Berthold, L. Nicola, P. M. Sarro, and M. J. Vellekoop, Glass-to-glass anodic bonding with standard IC technology thin films as intermediate layers, Sensors and Actuators, vol.82, pp.224-228, 2000.

G. Wallis, Field Assisted Glass Sealing. Electrocomponent Science and Technology, vol.2, pp.45-53, 1975.

T. Shimatsu and M. Uomoto, Atomic diffusion bonding of wafers with thin nanocrystalline metal films, Journal of Vacuum Science & Technology B, vol.28, issue.4, pp.706-714, 2010.

L. Lu, A. Jindal, Y. Kwon, J. J. Mcmahon, M. Rasco et al., Evaluation procedures for wafer bonding and thinning of interconnect test structures for 3D ICs, IEEE International Interconnect Technology Conference Proceedings, pp.74-76, 2003.

J. Lu, J. Mcmahon, and R. J. Gutmann, 3D integration using adhesive, metal and metal/adhesive as wafer bonding interface, MRS Fall Meeting, pp.1-12, 2008.

R. F. Wolffenbuttel and K. D. Wise, Low-temperature silicon wafer-to-wafer bonding using gold at eutectic temperature, Sensors and Actuators A: Physical, vol.43, pp.223-229, 1994.

F. Niklaus, G. Stemme, J. Lu, and R. Gutmann, Adhesive wafer bonding, Journal of Applied Physics, vol.99, p.31101, 2006.

S. Farrens, Metal based wafer bonding techniques for wafer bonding, Süss Report, 2009.

M. Konagai, M. Sugimoto, and K. Takashi, High efficiency GaAs thin film solar cells by peeled film technology, Journal of crystal growth, vol.45, pp.277-280, 1978.

E. Yablonovitch, T. Gmitter, J. P. Harbison, and R. Bhat, Extreme selectivity in the lift-off epitaxial GaAs films, Applied Physics Letters, vol.51, pp.2222-2224, 1987.

E. Yablonovitch, Epitaxial GaAs Lift-off, Properties of Gallium Arsenide, pp.672-676, 1996.

C. Zhang, D. Lubyshev, T. N. Jackson, D. L. Miller, and T. S. Mayer, The Effect of Al0.7Ga0.3As Etch Stop Removal on the Preparation of Wafer-Bonded Compliant Substrates, Journal of The Electrochemical Society, vol.146, issue.4, pp.1597-1601, 1999.

K. Hjort, Sacrificial etching of III-V compounds for micromechanical devices, J. Micromech. Microeng, vol.6, pp.370-375, 1996.

X. Sun, L. Hub, H. Song, Z. Li, D. Li et al., Selective wet etching of Al0.7Ga0.3As layer in concentrated HCl solution for peeling off GaAs microtips, Solid-State Electronics, vol.53, pp.1032-1035, 2009.

C. Cheng, K. Shiu, N. Li, S. Han, L. K. Shi-&-d et al., Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics, Nature Communications, 2013.

K. Hjort, Sacrificial etching of III-V compounds for micromechanical devices, J. Micromech. Microeng, vol.6, pp.370-375, 1996.

M. Englharda, B. Reutersa, F. B. Michaelisa, M. Behringera, P. Sundgrena et al.,

T. Skibitzkib and . Schroederb, A novel vacuum epitaxial lift-off (VELO) process for separation of hard GaAs substrate/carrier systems for a more green semiconductor LED production, Materials Science in Semiconductor Processing, vol.71, pp.389-395, 2017.

D. Geum, M. Park, J. Y. Lim, H. Yang, J. D. Song et al.,

. Choi, Ultra-high-throughput Production of III-V/Si Wafer for Electronic and photonic applications, Scientific reports, vol.6, p.20610, 2016.

J. J. Schermer, G. J. Bauhuis, P. Mulder, W. J. Meulemeesters, E. Haverkamp et al., High rate epitaxial lift-off of InGaP films from GaAs substrates, Applied Physics Letters, vol.76, p.21312133, 2000.

A. T. Van-niftrik, J. J. Schermer, G. J. Bauhuis, P. Mulder, P. K. Larsen et al., A Diffusion and Reaction Related Model of the Epitaxial Lift-Off Process, Journal of The Electrochemical Society, vol.154, issue.11, pp.629-635, 2007.

M. M. Voncken, J. J. Schermer, G. Maduro, G. J. Bauhuis, P. Mulder et al., Infuence of radius of curvature on the lateral etch rate of the weight induced epitaxial lift-off process, Materials Science and Engineering B, vol.95, p.242248, 2002.

J. Johnson, Hydrogen Ion-Implantation in Smart-Cut® SOI Fabrication Technique, 6.774 Term Project

F. Dross, J. Robbelein, B. Vandevelde, E. Van-kerschaver, I. Gordon et al.,

. Poortmans, Stress-induced large-area lift-off of crystalline Si films, Appl. Phys. A, vol.89, pp.149-152, 2007.

Y. Jannot, Thermique solaire, mars, 2011.

X. Yuanpei and X. Yimin, Light-harvesting photon management in GaAs solar cells for photovoltaicthermoelectric hybrid system, 2016.

H. Lalo, Réalisation d'une plateforme biopuce sans marquage basée sur la lithographie douce, 2009.

J. P. Connolly and D. Mencaraglia, III-V Solar Cells, Materials Challenges: Inorganic Photovoltaic Solar Energy, p.42, 2013.

M. A. Green, E. D. Dunlop, D. H. Levi, J. Hohl-ebinger, M. Yoshita et al., Solar cell efficiency tables (version 54), Progress In Photovoltaics, vol.27, pp.565-575, 2019.

A. Van-geelen, P. R. Hageman, G. J. Van-rijsing, P. C. Van-rijsingen, P. Schimidt et al.,

, Epitaxial lift-off GaAs solar cell from a reusable GaAs substrate, Materials Science and Engineering

. Sites,