M. Gouttefarde, J. Collard, N. Riehl, and C. Baradat, Geometry Selection of a Redundantly Actuated Cable-Suspended Parallel Robot, IEEE Transactions on Robotics, vol.31, issue.2, pp.501-510, 2015.
URL : https://hal.archives-ouvertes.fr/lirmm-01221397

J. Mirabel, S. Tonneau, P. Fernbach, A. Seppälä, M. Campana et al., HPP: a new software for constrained motion planning, IEEE/RSJ Intelligent Robots and Systems, October, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01290850

G. Barrette and C. Gosselin, Determination of the dynamic workspace of cable-driven planar parallel mechanisms, Journal of Mechanical Design, vol.127, pp.242-248, 2005.

A. Berti, J. Merlet, and M. Carricato, Workspace analysis of redundant cable-suspended parallel robots, pp.41-53, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01425213

G. Abbasnejad, J. Eden, and D. Lau, Generalized ray-based lattice generation and graph representation of wrench-closure workspace for arbitrary cable-driven robots, IEEE Transactions on Robotics, vol.35, issue.1, p.147161, 2019.

J. Merlet, On the workspace of suspended cable-driven parallel robots, 2016 IEEE International Conference on Robotics and Automation (ICRA), pp.841-846, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01419703

E. Stump and V. Kumar, Workspaces of cable-actuated parallel manipulators, Journal of Mechanical Design, vol.128, pp.159-167, 2006.

M. Gouttefarde and C. M. Gosselin, Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms, IEEE Transactions on Robotics, vol.22, issue.3, pp.434-445, 2006.
URL : https://hal.archives-ouvertes.fr/lirmm-00199376

X. Diao and O. Ma, Workspace analysis of a 6-dof cable robot for hardware-in-the-loop dynamic simulation, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.4103-4108, 2006.

J. T. Bryson, X. Jin, and S. K. , Optimal design of cabledriven manipulators using particle swarm optimization, ASME Journal of Mechanisms and Robotics, vol.8, issue.4, 2016.

P. Tempel, F. Schnelle, A. Pott, and P. Eberhard, Design and programming for cable-driven parallel robots in the german pavilion at the expo 2015, Machines, vol.3, pp.223-241, 2015.

A. Pott, T. Bruckmann, and L. Mikelsons, Closed-form force distribution for parallel wire robots, pp.25-34, 2009.

C. Gosselin, P. Ren, and S. Foucault, Dynamic trajectory planning of a two-dof cable-suspended parallel robot, 2012 IEEE International Conference on Robotics and Automation, pp.1476-1481, 2012.

J. Merlet, Checking the cable configuration of cable-driven parallel robots on a trajectory, pp.1586-1591, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01425220

J. Merlet, Simulation of discrete-time controlled cable-driven parallel robots on a trajectory, IEEE Transactions on Robotics, vol.33, issue.3, pp.675-688, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01643460

D. Bury, J. Izard, M. Gouttefarde, and F. Lamiraux, Continuous collision detection for a robotic arm mounted on a cable-driven parallel robot, IEEE/RSJ Intelligent Robots and Systems (IROS), 2019.
URL : https://hal.archives-ouvertes.fr/hal-02294402

F. Schwarzer, M. Saha, and J. Latombe, Exact collision checking of robot paths, Algorithmic Foundations of Robotics V, vol.7, pp.25-41, 2004.

S. Bouchard, C. Ement, C. Gosselin, and B. Moore, On the ability of a cable-driven robot to generate a prescribed set of wrenches, Journal of Mechanisms and Robotics, vol.2, 2010.

M. Gouttefarde and S. Krut, Characterization of parallel manipulator available wrench set facets, Advances in Robot Kinematics: Motion in Man and Machine, J. Lenarcic and, pp.475-482, 2010.
URL : https://hal.archives-ouvertes.fr/lirmm-00533860

M. Gouttefarde and C. M. Gosselin, On the Properties and the Determination of the Wrench-Closure Workspace of Planar Parallel Cable-Driven Mechanisms, ser. International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol.2, pp.337-346, 2008.
URL : https://hal.archives-ouvertes.fr/lirmm-00198798

S. M. Lavalle, Rapidly-exploring random trees: A new tool for path planning, 1998.