Failure Mode Analysis in Microsecond UV Laser Annealing of Cu Thin Films - LAAS - Laboratoire d'Analyse et d'Architecture des Systèmes Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

Failure Mode Analysis in Microsecond UV Laser Annealing of Cu Thin Films

Louis Thuries
  • Fonction : Auteur
  • PersonId : 1115627
Fabien Rozé
  • Fonction : Auteur
  • PersonId : 1115625
Toshiyuki Tabata
  • Fonction : Auteur
  • PersonId : 1115624
Fulvio Mazzamuto
  • Fonction : Auteur
  • PersonId : 1115629

Résumé

The need of surface-localized thermal processing is strongly increasing especially w.r.t three-dimensionally (3D) integrated electrical devices. UV laser annealing (UV-LA) technology well addresses this challenge. Particularly UV-LA can reduce resistivity by enlarging metallic grains in lines or thin films, irradiating only the interconnects for short timescales. However, the risk of failure in electrical performance must be correctly managed, and that of UV-LA has not been deeply studied yet. In this work microsecond-scale UV-LA is applied on a stack comparable to an interconnect structure (dielectric/Cu/Ta/SiO2/Si) in either melt or sub-melt regime for grain growth. The failure modes such as (i) Cu diffusion into SiO2, (ii) O incorporation into Cu, and (iii) intermixing between Cu and Ta are investigated.

Mots clés

Fichier principal
Vignette du fichier
2022_IITC_Demoulin_Tabata_proceedings.pdf (1.47 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03795894 , version 1 (04-10-2022)

Identifiants

Citer

Rémi Demoulin, Richard Daubriac, Louis Thuries, Emmanuel Scheid, Fabien Rozé, et al.. Failure Mode Analysis in Microsecond UV Laser Annealing of Cu Thin Films. IEEE International Interconnect Technology Conference (IITC) 2022, Jun 2022, San José, California, United States. ⟨10.1109/iitc52079.2022.9881308⟩. ⟨hal-03795894⟩
11 Consultations
35 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More