.. Éléments-de-technologie-d-'assemblage, 167 2.2.1. Assemblage PCB proposé avec une interconnexion filaire 2D, 167 2.2.2. Assemblage PCB proposé avec une interconnexion par clip Cu, p.169

T. Rossignol and «. , Contribution à la caractérisation et à la commande rapprochée de composants à grand gap moyenne tension pour onduleur de tension, Thèse de l'Institut National, p.2015

J. Sanchez, State of the art and trends in power integration, proceedings of modeling and simulation of microsystem conference (MCM)

J. Sanchez, Frédéric Morancho, « Composants semi-conducteurs?Intégration de puissance monolithique, 2007.

F. Capy, Etude et conception d'un interrupteur de puissance monolithique à auto-commutation : le thyristor dual disjoncteur, Thèse de l, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00446781

J. Laine, Mécanismes d'injection de porteurs minoritaires dans les circuits intégrés de puissance et structures de protections associées, Thèse de l'INSA de Toulouse, 2003.

C. Buttay, Le Packaging en électronique de puissance, Habilitation à diriger des recherches (HdR), 2015.

H. Manh and . Tran, Vers de nouveaux modules de puissance intégrés, Thèse de l, 2011.

M. Ishiko, M. Usui, T. Ohuchi, and M. Shirai, Design concept for wire-bonding reliability improvement by optimizing position in power devices, Microelectronics Journal, vol.37, issue.3, pp.262-268, 2006.
DOI : 10.1016/j.mejo.2005.09.015

M. Ciappa, Selected failure mechanisms of modern power modules, Microelectronics Reliability, vol.42, issue.4-5, pp.42-653, 2002.
DOI : 10.1016/S0026-2714(02)00042-2

X. He, X. Zeng, X. Yang, and Z. Wang, A hybrid integrated power electronic module based on pressure contact technology, Proc. IEEE Power Electron. Spec. Conf, pp.1-5, 2006.

L. Ménager, C. Martin, B. Allard, and E. V. Bley, Industrial and lab-scale power module technologies : A review, IECON 2006, 32nd Annual Conference on IEEE Industrial Electronics, pp.2426-2431, 2006.
DOI : 10.1109/IECON.2006.347559

J. N. Calata, J. G. Bai, X. Liu, S. Wen, and G. Lu, Three-dimensional packaging for power semiconductor devices and modules, IEEE Transactions on Advanced Packaging, vol.28, issue.3, 2005.
DOI : 10.1109/TADVP.2005.852837

Y. Ikeda, Y. Iizuka, Y. Hinata, M. Horio, M. Hori et al., Investigation on wirebond-less power module structure with high-density packaging and high reliability, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs, 2011.
DOI : 10.1109/ISPSD.2011.5890843

N. Nashida, Y. Hinata, M. Horio, R. Yamada, and E. Y. Ikeda, All-SiC power module for photovoltaic Power Conditioner System, 2014 IEEE 26th International Symposium on Power Semiconductor Devices & IC's (ISPSD), pp.342-345, 2014.
DOI : 10.1109/ISPSD.2014.6856046

M. Mermet-guyennet, New structure of power integrated module, 4th International Conference on Integrated Power Systems (CIPS), 2006.

S. S. Wen, D. Huff, and G. Lu, A Dimple-Array Interconnect Technique for Power Semiconductor Devices, Proceedings of the 13th International Symposium on Power Semiconductor Devices and ICs, 2001.
DOI : 10.1147/rd.133.0251

H. R. Chang, J. Bu, G. Kong, and E. R. Labayen, 300A 650V 70 um thin IGBTs with double-sided cooling, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs, pp.320-323, 2011.
DOI : 10.1109/ISPSD.2011.5890855

Z. Liang, F. C. Lee, and G. Lu, Embedded Power-An Integration Packaging Technology for IPEMs, The International Journal of Microcircuits and Electronic Packaging, vol.23, issue.4, 2000.

R. Fisher, R. Fillion, J. Burgess, and W. Hennessy, High frequency, low cost, power packaging using thin film power overlay technology, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition, APEC'95, p.95
DOI : 10.1109/APEC.1995.468955

L. Stevanovic, Packaging Challenges and Solutions for Silicon Carbide Power Electronics", ECTC panel session : Power Electronics -A Booming Market, 2012.

T. Stockmeier, P. Beckedahl, C. Göbl, and E. T. Malzer, SKiN: Double side sintering technology for new packages, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs, pp.324-327, 2011.
DOI : 10.1109/ISPSD.2011.5890856

P. Beckedahl, M. Spang, and E. O. Tamm, Breakthrough into the third dimension ? Sintered multi layer flex for ultra low inductance power modules, 8th International Conference on Integrated Power Electronics Systems (CIPS), 2014.

E. Hoene, A. Ostmann, B. T. Lai, C. Marczok, A. Müsing et al., Ultra- Low-Inductance Power Module for Fast Switching Semiconductors, PCIM Europe, pp.14-16, 2013.

C. Neeb, J. Teichrib, R. W. De-doncker, L. Boettcher, and A. Ostmann, A 50 kW IGBT power module for automotive applications with extremely low DC-link inductance, 2014 16th European Conference on Power Electronics and Applications, pp.26-28, 2014.
DOI : 10.1109/EPE.2014.6910953

E. Hoene, A. Ostmann, and C. Marczok, Packaging Very Fast Switching Semiconductors, CIPS, vol.2014

G. Feix, E. Hoene, O. Zeiter, and K. Pedersen, Embedded Very Fast Switching Module for SiC Power MOSFETs, PCIM Europe, vol.2015, 2015.

C. Neeb, L. Boettcher, M. Conrad, and R. W. De-doncker, Innovative and Reliable Power Modules: A Future Trend and Evolution of Technologies, IEEE Industrial Electronics Magazine, vol.8, issue.3, pp.6-16, 2014.
DOI : 10.1109/MIE.2014.2304313

G. Borghoff, Implementation of low inductive strip line concept for symmetric switching in a new high power module, PCIM Europe, vol.2013, pp.14-16, 2013.

Y. Su, W. Zhang, Q. Li, F. C. Lee, and M. Mu, High frequency integrated Point of Load (POL) module with PCB embedded inductor substrate, 2013 IEEE Energy Conversion Congress and Exposition, pp.15-19
DOI : 10.1109/ECCE.2013.6646847

B. Yang, J. Wang, S. Xu, J. Korec, and Z. J. Shen, Advanced Low-Voltage Power MOSFET Technology for Power Supply in Package Applications, IEEE Transactions on Power Electronics, vol.28, issue.9, 2013.
DOI : 10.1109/TPEL.2012.2230407

N. Rouger, L. Benaissa, J. Crébier, J. Widiez, J. Defonseca et al., Packaging à l'échelle du wafer pour les convertisseurs multicellulaires, European Journal of Electrical Engineering, 2013.
DOI : 10.3166/ejee.16.307-322

B. Letowski, J. Widiez, N. Rouger, M. Rabarot, W. Vandendaele et al., Mise en place d'un packaging 3D collectif de composants de puissance à structure verticale, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01361603

B. Eckardt, Cool Systems with SiC and GaN" (Fraunhoffer IISB). https

J. Zhou, A Novel SiC Power Module with 3D Integration, PCIM Europe, vol.2017, pp.16-18, 2017.

L. Ménager, Contribution à l'intégration des convertisseurs de puissance 3D, Thèse de l'INSA de Lyon, 2008.

B. Mouawad, Assemblages innovants en électronique de puissance utilisant la technique de « Spark Plasma Sintering, Thèse de L'INSA de Lyon, 2013.

D. W. Green, S. Hardikar, M. Sweet, K. V. Vershinin, and E. M. Narayanan, Interaction between monolithically integrated JI-LIGBTs under clamped inductive switching, Proceedings of the 17th International Symposium on Power Semiconductor Devices & IC's, 2005.

D. W. Green and E. M. Narayanan, Fully Isolated High Side and Low Side LIGBTs in Junction Isolation Technology, 2006 IEEE International Symposium on Power Semiconductor Devices & IC's, 2006.
DOI : 10.1109/ISPSD.2006.1666111

Y. Ozeki, K. Kouno, and T. Fujii, Semiconductor device and method for manufacturing same, pp.20080135932-1, 2007.

Y. Uemoto, T. Morita, A. Ikoshi, H. Umeda, H. Matsuo et al., GaN monolithic inverter IC using normally-off gate injection transistors with planar isolation on Si substrate, 2009 IEEE International Electron Devices Meeting (IEDM), 2009.
DOI : 10.1109/IEDM.2009.5424397

W. Chen, K. Y. Wong, and K. J. Chen, Single-Chip Boost Converter Using Monolithically Integrated AlGaN/GaN Lateral Field-Effect Rectifier and Normally Off HEMT, IEEE Electron Device Letters, vol.30, issue.5, pp.430-432, 2009.
DOI : 10.1109/LED.2009.2015897

A. El and K. , Architectures de cellules de commutation monolithiques intégrables sur semi-conducteurs « bi-puce » et « mono-puce » pour convertisseurs de puissance compacts, Thèse de l, 2014.

K. Yamagami, Transistors, Japanese Patent S4 721 739, 1968.

B. J. Baliga, Enhancement- and depletion-mode vertical-channel m.o.s. gated thyristors, Electronics Letters, vol.15, issue.20, pp.645-647, 1979.
DOI : 10.1049/el:19790459

A. Nakagawa, H. Ohashi, M. Kurata, H. Yamaguchi, and E. K. Watanabe, Non-latch-up 1200V 75A bipolar-mode MOSFET with large ASO, 1984 International Electron Devices Meeting, pp.860-861, 1984.
DOI : 10.1109/IEDM.1984.190866

G. Miller and J. Sack, A new concept for a non punch through IGBT with MOSFET like switching characterist(ICs), Proc. IEEE PESC Recor, pp.21-25, 1989.

H. R. Chang, B. J. Baliga, J. W. Kretchmer, and P. A. Piacente, "Insulated gate bipolar transistor (IGBT) with a trench gate structure ", 1987 International Electron Devices Meeting, pp.674-677, 1987.
DOI : 10.1109/IEDM.1987.191518

B. J. Baliga, Trends in power semiconductor devices, IEEE Transactions on Electron Devices, pp.1717-1731, 1996.
DOI : 10.1109/16.536818

T. P. Chow, B. J. Baliga, H. R. Chang, P. V. Gray, W. Hennessy et al., Pchannel , vertical insulated gate bipolar transistors with collector short, International Electron Devices Meeting, pp.670-673, 1987.
DOI : 10.1109/iedm.1987.191517

H. Jiang, A Snapback Suppressed Reverse-Conducting IGBT With a Floating p-Region in Trench Collector, IEEE Electron Device Letters, pp.417-419, 2012.
DOI : 10.1109/LED.2011.2180357

G. Deng, A snapback-free RC-IGBT with Alternating N/P buffers, 2017 29th International Symposium on Power Semiconductor Devices and IC's (ISPSD), pp.127-130
DOI : 10.23919/ISPSD.2017.7988943

W. Chen, Z. Li, Y. Liu, M. Ren, B. Zhang et al., A snapback suppressed reverse-conducting IGBT with built-in diode by utilizing edge termination, Superlattices and Microstructures, vol.70, pp.109-116, 2014.
DOI : 10.1016/j.spmi.2014.02.018

U. R. Vemulapati, N. Kaminski, D. Silber, L. Storasta, and M. Rahimo, Analytical Model for the Initial Snapback Phenomenon in RC-IGBTs, ISPS, 2012.

D. Domes, Control Method for a Reverse Conducting IGBT International Exhibition and Conference for Power Electronics, Proceedings of PCIM Europe, pp.1-8, 2015.

D. Werber, A 1000A 6.5kV Power Module Enabled by Reverse-Conducting Trench-IGBT-Technology International Exhibition and Conference for Power Electronics, Intelligent Motion, PCIM Asia, pp.1-8, 2016.

M. Antoniou, F. Udrea, F. Bauer, and I. Nistor, A new way to alleviate the RC IGBT snapback phenomenon: The Super Junction solution, 2010 22 nd International Symposium on Power Semiconductor Devices IC's (ISPSD), pp.153-156, 2010.

T. Minato, S. Aono, K. Uryu, and T. Yamaguchi, Making a bridge from SJ-MOSFET to IGBT via RC-IGBT structure Concept for 600V class SJ-RC-IGBT in a single chip solution, 2012 24th International Symposium on Power Semiconductor Devices and ICs, pp.137-140, 2012.
DOI : 10.1109/ISPSD.2012.6229042

M. Rahimo, A. Kopta, U. Schlapbach, J. Vobecky, R. Schnell et al., The Bimode Insulated Gate Transistor (BIGT) A Potential Technology for Higher Power Applications, pp.283-286, 2009.

L. Storasta, A. Kopta, and M. Rahimo, A comparison of charge dynamics in the reverse-conducting RC IGBT and Bi-mode Insulated Gate Transistor BiGT, 2010 22 nd International Symposium on Power Semiconductor Devices & IC's (ISPSD), pp.391-394, 2010.

L. Storasta, M. Rahimo, M. Bellini, A. Kopta, U. R. Vemulapati et al., The radial layout design concept for the Bi-mode insulated gate transistor, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs, pp.56-59, 2011.
DOI : 10.1109/ISPSD.2011.5890789

M. Rahimo, M. Andenna, L. Storasta, C. Corvasce, and A. Kopta, Demonstration of an enhanced trench Bimode Insulated Gate Transistor ET-BIGT, 2016 28th International Symposium on Power Semiconductor Devices and ICs (ISPSD), pp.151-154
DOI : 10.1109/ISPSD.2016.7520800

M. Rahimo, U. Schlapbach, R. Schnell, A. Kopta, J. Vobecky et al., Realization of higher output power capability with the Bi-mode Insulated Gate Transistor (BIGT), 13 th European Conference on Power Electronics and Applications, pp.1-10, 2009.

M. Rahimo, J. Vobecky, and C. Corvasce, 1700V Bi-Mode Insulated Gate Transistor (BIGT) on Thin Wafer Technology, Proc. ISPS10, pp.243-247, 2010.
DOI : 10.1109/ispsd.2009.5158057

H. Jiang, B. Zhang, W. Chen, C. Liu, Z. Rao et al., A Snapback Suppressed Reverse Conducting IGBT with Oxide Trench Collector, 2012 Asia-Pacific Power and Energy Engineering Conference, pp.1-4
DOI : 10.1109/APPEEC.2012.6307221

Z. Liheng and C. Xingbi, Theoretical calculation of the p-emitter length for snapbackfree reverse-conducting IGBT, Journal of Semiconductors, vol.35, issue.6

N. Clark, E. Motto, and S. Shibata, New SLIM Package Intelligent Power Modules (SLIMDIP) with thin RC-IGBT for consumer goods applications, 2015 IEEE Energy Conversion Congress and Exposition (ECCE), pp.4510-4512, 2015.
DOI : 10.1109/ECCE.2015.7310296

Y. Wang and S. Shibata, New Transfer Mold type SLIMDIP with RC-IGBT and high precision Short Circuit protection function International Exhibition and Conference for Power Electronics, Intelligent Motion, PCIM Asia, pp.1-7, 2016.

A. El and K. , Architectures de cellules de commutation monolithiques intégrables sur semi-conducteurs "bi-puce" et "mono-puce" pour convertisseurs de puissance compacts, Thèse de l, 2014.

A. Khadiry, A. Bourennane, and F. Richardeau, Multiphase Power Converter Integration in Si: Dual-Chip and Ultimate Monolithic Integrations, IEEE Transactions on Electron Devices, pp.1977-1983, 2016.
DOI : 10.1109/TED.2016.2537212

B. and J. Baliga, Fundamentals of Power Semiconductor Devices, 2008.
DOI : 10.1007/978-0-387-47314-7

K. Mochizuki, K. Ishii, M. Takeda, H. Hagino, and T. Yamada, Examination of punch through IGBT (PT-IGBT) for high voltage and high current applications Power Semiconductor Devices and IC's, 1997. ISPSD '97, IEEE International Symposium on, pp.237-240, 1997.

G. Miller and J. Sack, A new concept for a non punch through IGBT with MOSFET like switching characterist(ICs), Proc. IEEE PESC Recor, pp.21-25, 1989.

H. Yilmaz, J. L. Benjamin, R. F. Dyer, L. S. Chen, W. R. Van-dell et al., Comparison of the Punch-Through and Non-Punch-Through IGT Structures, IEEE Transactions on Industry Applications, pp.22-466, 1986.
DOI : 10.1109/TIA.1986.4504744

B. J. Baliga, Analysis of insulated gate transistor turn-off characteristics, IEEE Electron Device Letters, pp.74-77, 1985.
DOI : 10.1109/EDL.1985.26048

J. Brown, Power MOSFET Basics: Understanding Gate Charge and Using it to Assess Switching Performance, 2004.

P. Lefranc, Étude, conception et réalisation de circuits de commande d'IGBT de forte puissance, Thèse de l'INSA de Toulouse, 2005.

E. Imbernon, Etude et optimisation d'une filière technologique flexible adaptée au mode d'intégration fonctionnelle, Thèse de l, 2002.

F. Capy, Étude et conception d'un interrupteur de puissance monolithique à auto-commutation : le thyristor dual disjoncteur, Thèse de l, 2009.
DOI : 10.3166/ejee.12.137-147

H. Jiang, A Snapback Suppressed Reverse-Conducting IGBT With a Floating p-Region in Trench Collector, IEEE Electron Device Letters, pp.417-419, 2012.
DOI : 10.1109/LED.2011.2180357

A. El and K. , Architectures de cellules de commutation monolithiques intégrables sur semi-conducteurs "bi-puce" et "mono-puce" pour convertisseurs de puissance compacts, Thèse de l, 2014.

O. Causse, Contribution à l'amélioration de la fonctionnalité et des performances de l'IGBT, 2001.

X. Q. Li, Z. F. Zhou, W. H. Li, and Q. A. Huang, Three-dimensional modeling and simulation of the Bosch process with the level set method, IEEE SENSORS 2014 Proceedings, pp.570-573
DOI : 10.1109/ICSENS.2014.6985062

V. A. Temple, Junction termination extension (JTE), A new technique for increasing avalanche breakdown voltage and controlling surface electric fields in P-N junctions, 1977 International Electron Devices Meeting, pp.423-426, 1977.
DOI : 10.1109/IEDM.1977.189277

A. El and K. , Architectures de cellules de commutation monolithiques intégrables sur semi-conducteurs "bi-puce" et "mono-puce" pour convertisseurs de puissance compacts, Thèse de l, 2014.

A. Khadiry, A. Bourennane, M. Breil, and F. Richardeau, Monolithically integrated switching cells suitable for high density power conversion, ISPS'12), pp.222-227

A. Lale, N. Videau, A. Bourennane, F. Richardeau, and S. Charlot, Analysis of the three-chip switching cells approach for integrated multiphase power converter combining monolithic and hybrid techniques: Experimental validation on SiC and Si power assembly prototypes, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe), pp.1-12
DOI : 10.1109/EPE.2015.7311711
URL : https://hal.archives-ouvertes.fr/hal-01230267

N. Videau, 5-phase interleaved buck converter with gallium nitride transistors, The 1st IEEE Workshop on Wide Bandgap Power Devices and Applications, pp.190-193, 2013.
DOI : 10.1109/WiPDA.2013.6695594

N. Videau, Convertisseurs continu-continu non isolés à haut rapport de conversion pour Piles à Combustible et Electrolyseurs -Apport des composants GaN, Thèse de doctorat de l'Institut National Polytechnique de Toulouse -INPT, 2014.

D. Reusch and J. Strydom, Understanding the effect of PCB layout on circuit performance in a high frequency gallium nitride based point of load converter, pp.649-655, 2013.

D. Reusch, J. Strydom, and A. Lidow, Monolithic Integration of GaN Transistors for Higher Efficiency and Power Density in DC-DC Converters, Proceedings of PCIM Europe 2015, International Exhibition and Conference for Power Electronics, pp.1-8, 2015.

Z. Chen, . Yao, . Boroyevich, . Dushan, . Ngo et al., An ultrafast SiC phase-leg module in modified hybrid packaging structure, Energy Conversion Congress and Exposition (ECCE), 2014 IEEE, pp.2880-2886, 2014.
DOI : 10.1109/ecce.2014.6953789

N. Zhang, S. Wang, and H. Zhao, Develop Parasitic Inductance Model for the Planar Busbar of an IGBT H Bridge in a Power Inverter, IEEE Transactions on Power Electronics, pp.6924-6933, 2015.

H. Tahir, « Conception et réalisation de structures IGBTs bidirectionnelles en courant et en tension, 2011.

S. Li, L. M. Tolbert, and F. Wang, Fang Zheng PengReduction of stray inductance in power electronic modules using basic switching cells, Energy Conversion Congress and Exposition 2010 IEEE, pp.2686-2691, 2010.

S. Li, L. M. Tolbert, F. Wang, and F. Z. Peng, P-cell and N-cell based IGBT module: Layout design, parasitic extraction, and experimental verification, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), 2011.
DOI : 10.1109/APEC.2011.5744623

S. Li, Packaging design of IGBT power Module using novel switching cells, 2011.

S. Li and L. M. Tolbert, Fei Wang; Fang Zheng PengStray Inductance Reduction of Commutation Loop in the P-cell and N-cell-Based IGBT Phase Leg Module, IEEE Transactions on, vol.29, issue.7, pp.3616-3624, 2014.

L. Havez, E. Sarraute, and R. , Modélisation 3D de bobinages "feuillards" à l'aide d'éléments coques pour la simulation de coupleurs magnétiques haute fréquence, 8ème Conférence Européenne sur les Méthodes Numériques en Électromagnétisme, pp.3-5, 2015.

Z. Chen, Electrical Integration of SiC Power Devices for High-Power- Density Applications, Thèse de l'Université de Virginia Polytechnic, 2013.

Y. Ren, Voltage Suppression in Wire-Bond-Based Multichip Phase-Leg SiC MOSFET Module Using Adjacent Decoupling Concept, IEEE Transactions on Industrial Electronics, pp.8235-8246, 2017.
DOI : 10.1109/TIE.2017.2714149

S. Tanimoto and K. Matsui, High Junction Temperature and Low Parasitic Inductance Power Module Technology for Compact Power Conversion Systems, IEEE Transactions on Electron Devices, vol.62, issue.2, pp.258-269, 2015.
DOI : 10.1109/TED.2014.2359978

T. Rossignol, F. Senghor, D. Risaletto, J. Blaquière, F. Richardeau et al., Switching optimization of WBG power devices on inverter leg « dv/dt ? switching energy » trade off and comparison using directly the gate resistance or an additional feedback gate-drain capacitor, pp.16-18