B. Louis and D. M. Bertrand, Stanislas, « l'industrie française des matériaux composites ? des enjeux prioritaires pour un développement durable », Nodal Consultants, 2002.

J. D. Menczel and R. B. Prime, Thermal Analysis of Polymers: Fundamentals and Applications, 2009.
DOI : 10.1002/9780470423837

J. K. Gillham, Formation and properties of thermosetting and high tg polymeric materials, Makromolekulare Chemie. Macromolecular Symposia, vol.29, issue.1, pp.67-74, 1987.
DOI : 10.1002/app.1984.070290610

C. Paris, Étude et modélisation de la polymérisation dynamique de composites à matrice thermodurcissable, Thèse, 2011.

C. Barrere and F. Dal-maso, R??sines ??poxy r??ticul??es par des polyamines : structure et propri??t??s, Revue de l'Institut Fran??ais du P??trole, vol.52, issue.3, pp.317-335, 1997.
DOI : 10.2516/ogst:1997043

H. T. Lee and D. W. Levi, Effect of curing temperature on the thermal degradation of an epoxide resin, Journal of Applied Polymer Science, vol.13, issue.8, pp.1703-1705, 1969.
DOI : 10.1002/app.1969.070130811

I. Sawi, P. A. Olivier, P. Demont, and E. H. Bougherara, Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes, Composites Science and Technology, vol.73, pp.19-26
DOI : 10.1016/j.compscitech.2012.08.016

URL : https://hal.archives-ouvertes.fr/hal-00904040

«. Hexcel and . Prepreg, M21_global ». Hexcel Corporation, p.2010

Y. Lin, Comportement thermoélectrique de matériaux composites pour applications aéronautiques Thèse, Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique, 2013.

C. Paris, G. Bernhart, and P. A. Olivier, De Almeida, « Influence de cycles de cuisson rapides sur le pré-imprégné aéronautique M21/T700 : suivi de polymérisation et propriétés mécaniques, 17èmes Journées Nationales sur les Composites (JNC17), p.123, 2011.

, Glossaire réalisé par le Centre d'Animation Régional en Matériaux Avancés (CARMA), « Glossaire des matériaux composites ». Provence-Alpes-Côte d'Azur, 2004.

D. Sheet-de-la-fibre-de-carbone-fourni-par-la-société, T. , «. T700s-data, and ». Sheet, [13] « Les facteurs de choix d'un procédé, Disponible sur, pp.12-2014

M. J. , L. , D. R. Mulligan, and «. , Cure monitoring techniques for polymer composites, adhesives and coatings, 2005.

J. Kim and D. G. Lee, On-line cure monitoring and viscosity measurement of carbon fiber epoxy composite materials, Journal of Materials Processing Technology, vol.37, issue.1-4, pp.405-416, 1993.
DOI : 10.1016/0924-0136(93)90105-F

G. Framezelle, F. Lepiller, J. Hatsch, and E. S. Remond, Contrôle non destructif de structures composites pour l'aéronotique », présenté à Cofrend, 2011.

J. Cai, L. Qiu, S. Yuan, L. Shi, P. Liu et al., Structural Health Monitoring for Composite Materials Composites and Their Applications, 2012.

P. J. Schubel, R. J. Crossley, E. K. Boateng, and J. R. Hutchinson, Review of structural health and cure monitoring techniques for large wind turbine blades, Review of structural health and cure monitoring techniques for large wind turbine blades, pp.113-123, 2013.
DOI : 10.1016/j.renene.2012.08.072

C. Boller and W. J. Staszewski, Aircraft Structural Health and Usage Monitoring, Health Monitoring of Aerospace Structures, pp.29-73, 2003.
DOI : 10.1002/0470092866.ch2

B. Mitra and D. J. Booth, Remote cure monitoring of epoxy materials using optical techniques, Ultrasonics, vol.35, issue.8, pp.569-572, 1998.
DOI : 10.1016/S0041-624X(97)00156-X

M. A. , Afromowitz, « Fiber optic polymer cure sensor, J. Light. Technol, vol.6, issue.10, pp.1591-1594, 1988.

G. F. Fernando, Fibre optic sensor systems for monitoring composite structures, Reinforced Plastics, vol.49, issue.11, pp.41-49, 2005.
DOI : 10.1016/S0034-3617(05)70836-5

A. Malki, R. Gafsi, L. Michel, and M. Labarrère, Lecoy, « Impact and vibration detection in composite materials by using intermodal interference in multimode optical fibers, Appl. Opt, vol.35, pp.25-5198, 1996.
DOI : 10.1364/ao.35.005198

V. M. Murukeshan, P. Y. Chan, L. S. Ong, and L. K. Seah, Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors, Sensors and Actuators A: Physical, vol.79, issue.2, pp.153-161, 2000.
DOI : 10.1016/S0924-4247(99)00266-6

P. Wang, D. Li, Q. Shang, Z. Chen, and E. H. Wang, Cure monitoring of epoxy resin via use of FBG, 2012 7th International Forum on Strategic Technology (IFOST), pp.60-63, 2013.
DOI : 10.1109/IFOST.2012.6357614

C. Sonnenfeld, « Cure Cycle Monitoring of Laminated Carbon Fiber-Reinforced Plastic with Fiber Bragg Gratings in Microstructured Optical Fiber », présenté à ICCM19, 2013.

B. Torres, I. Payá-zaforteza, P. A. Calderón, and J. M. Adam, Analysis of the strain transfer in a new FBG sensor for Structural Health Monitoring, Engineering Structures, vol.33, issue.2, pp.539-548
DOI : 10.1016/j.engstruct.2010.11.012

Y. Qiu, Q. Wang, H. Zhao, J. Chen, and E. Y. Wang, Applications of FBG Sensors for Airship Structural Health Monitoring 2012 Symposium on Photonics and Optoelectronics (SOPO), pp.2012-2013

H. Kang, D. Kang, H. Bang, C. Hong, and C. Kim, Cure monitoring of composite laminates using fiber optic sensors, Smart Materials and Structures, vol.11, issue.2, p.279, 2002.
DOI : 10.1088/0964-1726/11/2/311

L. Robert and G. Dusserre, Assessment of thermoset cure-induced strains by fiber bragg grating sensor, Polymer Engineering & Science, vol.65, issue.7, pp.1585-1594
DOI : 10.1016/j.compscitech.2005.02.003

URL : https://hal.archives-ouvertes.fr/hal-01611617

F. Collombet, M. Mulle, H. Hernández-m, B. Douchin, R. Zitoune et al., On the use of optical fibres with Bragg gratings for the identification of process-properties relations of composite structures, présenté à 16th international conference on composite materials, 2007.

M. Mulle, F. Collombet, P. Olivier, and Y. Grunevald, Assessment of cure residual strains through the thickness of carbon???epoxy laminates using FBGs, Part I: Elementary specimen, Composites Part A: Applied Science and Manufacturing, vol.40, issue.1, 2009.
DOI : 10.1016/j.compositesa.2008.10.008

M. Mulle, F. Collombet, P. Olivier, R. Zitoune, C. Huchette et al., Assessment of cure-residual strains through the thickness of carbon???epoxy laminates using FBGs Part II: Technological specimen, Composites Part A: Applied Science and Manufacturing, vol.40, issue.10, pp.1534-1544, 2009.
DOI : 10.1016/j.compositesa.2009.06.013

F. Lionetto, A. Tarzia, E. A. Maffezzoli, and . Air, Air-Coupled Ultrasound: A Novel Technique for Monitoring the Curing of Thermosetting Matrices, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol.54, issue.7, pp.1437-1444, 2007.
DOI : 10.1109/TUFFC.2007.404

N. Toyama and J. Takatsubo, An investigation of non-linear elastic behavior of CFRP laminates and strain measurement using Lamb waves, Composites Science and Technology, vol.64, issue.16, pp.2509-2516, 2004.
DOI : 10.1016/j.compscitech.2004.05.007

M. Surgeon and M. Wevers, Modal analysis of acoustic emission signals from CFRP laminates, NDT & E International, vol.32, issue.6, pp.311-322, 1999.
DOI : 10.1016/S0963-8695(98)00077-2

Y. J. Yan and L. H. Yam, Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis, Composite Structures, vol.58, issue.1, pp.29-38, 2002.
DOI : 10.1016/S0263-8223(02)00043-0

P. Kudela and W. Ostachowicz, Damage detection in composite plates with embedded PZT transducers, Mechanical Systems and Signal Processing, vol.22, issue.6, pp.1327-1335, 2008.
DOI : 10.1016/j.ymssp.2007.07.008

T. E. Michaels and J. E. Michaels, Integrating monitoring and inspection with attached ultrasonic transducers, Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems V, pp.61770-61770, 2006.
DOI : 10.1117/12.658857

S. Zedek, C. Codreanu, A. Belisario-briceño, J. Fourniols, C. Escriba et al., Adaptable Synchronous Detection for the SHM of Composite Component: Autonomous FPAA Architecture on Polyimide Film », présenté à EWSHM -7th European Workshop on Structural Health Monitoring, 2014.

A. Belisario-briceño, S. Zedek, T. Camps, R. François, and C. Escriba, Fourniols, « SHM Based on Modal Analysis: Accelerometer and Piezoelectric Transducers Instrumentation for Civil Engineering in Heterogeneous Structures », présenté à EWSHM -7th European Workshop on Structural Health Monitoring, 2014.

S. Fettouma, Z. , and «. , Intégration d'architectures mixtes reconfigurables (Analogiques, Numériques et Hybrides) : Application à la détection de défauts dans des structures hétérogènes, Thèse, 2015.

H. Boukabache, M. Matmat, C. Escriba, and J. Fourniols, Sensors/actuators network development for aeronautics structure health monitoring, pp.1157-1160, 2011.

H. Boukabache, « Etude et développement d'un noeud piézoélectrique intégré dans un micro-système reconfigurable : applications à la surveillance " de santé " de structures aéronautiques, Thèse, 2013.

S. Zedek, C. Escriba, and J. Fourniols, Dedicated system for Structural Health Monitoring of aircraft hardware system based on V-cycle model, 2015 IEEE International Symposium on Systems Engineering (ISSE), p.5, 2015.
DOI : 10.1109/SysEng.2015.7302753

URL : https://hal.archives-ouvertes.fr/hal-01211475

H. S. Park, H. Y. Lee, S. W. Choi, E. Y. Kim, and «. A. , Practical Monitoring System for the Structural Safety of Mega-Trusses Using Wireless Vibrating Wire Strain Gauges », Sensors, pp.12-17346

H. Capteurs-développés-par-la-société, «. Hbm-strain-gauges, and ». , Disponible sur : http://www.hbm.com/en/0364/strain-gauges-for-stress-analysis/ [en date du, pp.12-2014

N. Dinh-trong, J. Steitz, and L. Bu, Kanoun, « Influence of the composition of MWCNTs layers on the properties of strain gauges, 9th IEEE Conference on Nanotechnology, pp.477-480, 2009.

S. Bhalla, Y. W. Yang, J. Zhao, and C. K. Soh, Structural health monitoring of underground facilities ??? Technological issues and challenges, Tunnelling and Underground Space Technology, vol.20, issue.5, pp.487-500, 2005.
DOI : 10.1016/j.tust.2005.03.003

A. Gillet, P. Olivier, and A. Maghribi, El Sawi, « Prédiction des propriétés électrique d'un composite aéronautique, JNC16, p.10, 2009.

Z. Xia and W. Curtin, Modeling of mechanical damage detection in CFRPs via electrical resistance, Composites Science and Technology, vol.67, issue.7-8, pp.1518-1529, 2007.
DOI : 10.1016/j.compscitech.2006.07.017

J. B. Park, T. Okabe, N. Takeda, and W. A. Curtin, Electromechanical modeling of unidirectional CFRP composites under tensile loading condition », Compos. Part Appl

. Sci and . Manuf, , pp.267-275, 2002.

Z. Xia, T. Okabe, J. B. Park, W. A. Curtin, and E. N. Takeda, Quantitative damage detection in CFRP composites, Composites Science and Technology, vol.63, issue.10, pp.1411-1422, 2003.
DOI : 10.1016/S0266-3538(03)00083-6

D. Lalonde, « Caractérisation électrique et thermique de matériaux en composite de carbone utilisés en aéronautique dans le cadre d'études de solutions de retour de courant, 2011.

F. Roussel, Élaboration et étude des propriétés électriques d'un matériau composite nanotubes de carbone alignés -époxy

A. Todoroki and M. Ueda, Low-cost delamination monitoring of CFRP beams using electrical resistance changes with neural networks, Smart Materials and Structures, vol.15, issue.4, p.75, 2006.
DOI : 10.1088/0964-1726/15/4/N01

A. Todoroki, M. Tanaka, and E. Y. Shimamura, « Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method, Compos. Sci. Technol, vol.62, issue.5, pp.619-628, 2002.

A. Todoroki and Y. Tanaka, Delamination identification of cross-ply graphite/epoxy composite beams using electric resistance change method, Composites Science and Technology, vol.62, issue.5, pp.629-639, 2002.
DOI : 10.1016/S0266-3538(02)00013-1

A. Todoroki, Y. Tanaka, and E. Y. Shimamura, Delamination monitoring of graphite/epoxy laminated composite plate of electric resistance change method, Composites Science and Technology, vol.62, issue.9, pp.1151-1160, 2002.
DOI : 10.1016/S0266-3538(02)00053-2

A. Todoroki, M. Tanaka, and E. Y. Shimamura, Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes, Composites Science and Technology, vol.65, issue.1, pp.37-46, 2005.
DOI : 10.1016/j.compscitech.2004.05.018

A. Todoroki, M. Tanaka, and E. Y. Shimamura, High performance estimations of delamination of graphite/epoxy laminates with electric resistance change method, Composites Science and Technology, vol.63, issue.13, 2003.
DOI : 10.1016/S0266-3538(03)00157-X

A. Todoroki, K. Omagari, Y. Shimamura, and E. H. Kobayashi, Matrix crack detection of CFRP using electrical resistance change with integrated surface probes, Composites Science and Technology, vol.66, issue.11-12, pp.1539-1545, 2006.
DOI : 10.1016/j.compscitech.2005.11.029

A. Todoroki, Y. Samejima, Y. Hirano, and E. R. Matsuzaki, Piezoresistivity of unidirectional carbon/epoxy composites for multiaxial loading, Composites Science and Technology, vol.69, issue.11-12, pp.1841-1846, 2009.
DOI : 10.1016/j.compscitech.2009.03.023

A. Todoroki, The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance, Composites Science and Technology, vol.61, issue.13, pp.1871-1880, 2001.
DOI : 10.1016/S0266-3538(01)00088-4

A. Todoroki, Electric Resistance Change Method for Cure/Strain/Damage Monitoring of CFRP Laminates, Key Engineering Materials, vol.270, issue.273, pp.1812-1820, 2004.
DOI : 10.4028/www.scientific.net/KEM.270-273.1812

R. Schueler, S. P. Joshi, and E. K. Schulte, Damage detection in CFRP by electrical conductivity mapping, Composites Science and Technology, vol.61, issue.6, pp.921-930, 2001.
DOI : 10.1016/S0266-3538(00)00178-0

S. Wang and D. D. Chung, Apparent negative electrical resistance in carbon fiber composites, Composites Part B: Engineering, vol.30, issue.6, pp.579-590, 1999.
DOI : 10.1016/S1359-8368(99)00021-9

URL : http://wings.buffalo.edu/academic/department/eng/mae/cmrl/Apparent negative electrical resistance in carbon fiber composites.pdf

J. Jellid, « Suivi du cycle de vie d'un composite CFRP hybride par mesure de résistance électrique, Thèse, Ecole centrale de Lyon, 2010.

J. C. Abry, S. Bochard, A. Chateauminois, M. Salvia, and E. G. Giraud, In situ detection of damage in CFRP laminates by electrical resistance measurements, Composites Science and Technology, vol.59, issue.6, pp.925-935, 1999.
DOI : 10.1016/S0266-3538(98)00132-8

J. Abry, « Suivi in situ d'endommagement dans les matériaux composites carbone/époxy par mesure des variations de propriétés électriques, Thèse, 1998.

M. Kupke, K. Schulte, and E. R. Schüler, Non-destructive testing of FRP by d.c. and a.c. electrical methods, Composites Science and Technology, vol.61, issue.6, pp.837-847, 2001.
DOI : 10.1016/S0266-3538(00)00180-9

N. Angelidis, « Damage sensing in CFRP composites using electrical potential techniques, 2004.
DOI : 10.1117/12.508692

X. Wang and D. D. Chung, Self-monitoring of fatigue damage and dynamic strain in carbon fiber polymer-matrix composite, Composites Part B: Engineering, vol.29, issue.1, pp.63-73, 1998.
DOI : 10.1016/S1359-8368(97)00014-0

M. Louis, S. P. Joshi, and E. W. Brockmann, An experimental investigation of through-thickness electrical resistivity of CFRP laminates, Composites Science and Technology, vol.61, issue.6, pp.911-919, 2001.
DOI : 10.1016/S0266-3538(00)00177-9

T. J. Swait, F. R. Jones, and S. A. Hayes, A practical structural health monitoring system for carbon fibre reinforced composite based on electrical resistance, Composites Science and Technology, vol.72, issue.13, pp.13-1515, 2012.
DOI : 10.1016/j.compscitech.2012.05.022

J. Wen, Z. Xia, and E. F. Choy, Damage detection of carbon fiber reinforced polymer composites via electrical resistance measurement, Composites Part B: Engineering, vol.42, issue.1, pp.77-86
DOI : 10.1016/j.compositesb.2010.08.005

Z. H. Xia and W. A. Curtin, Damage detection via electrical resistance in CFRP composites under cyclic loading, Composites Science and Technology, vol.68, issue.12, pp.2526-2534, 2008.
DOI : 10.1016/j.compscitech.2008.05.007

I. De-baere, W. Van-paepegem, and E. J. Degrieck, Electrical resistance measurement for in situ monitoring of fatigue of carbon fabric composites, International Journal of Fatigue, vol.32, issue.1, 2010.
DOI : 10.1016/j.ijfatigue.2009.02.044

P. E. Irving and C. Thiagarajan, Fatigue damage characterization in carbon fibre composite materials using an electrical potential technique, Smart Materials and Structures, vol.7, issue.4, p.456, 1998.
DOI : 10.1088/0964-1726/7/4/004

K. Schulte and C. Baron, Load and failure analyses of CFRP laminates by means of electrical resistivity measurements, Composites Science and Technology, vol.36, issue.1, pp.63-76, 1989.
DOI : 10.1016/0266-3538(89)90016-X

D. D. Chung, Structural health monitoring by electrical resistance measurement, Smart Materials and Structures, vol.10, issue.4, pp.624-636, 2001.
DOI : 10.1088/0964-1726/10/4/305

D. D. Chung, Thermal analysis of carbon fiber polymer-matrix composites by electrical resistance measurement, Thermochimica Acta, vol.364, issue.1-2, pp.121-132, 2000.
DOI : 10.1016/S0040-6031(00)00631-6

D. Song, N. Takeda, and E. A. Kitano, Correlation between mechanical damage behavior and electrical resistance change in CFRP composites as a health monitoring sensor, Materials Science and Engineering: A, vol.456, issue.1-2, pp.286-291, 2007.
DOI : 10.1016/j.msea.2006.11.130

M. Ueda, A. Todoroki, Y. Shimamura, E. H. Kobayashi, L. Ye et al., Delamination Monitoring of CFRP Laminates Using Electrical Potential Method, Composite Technologies for 2020, pp.1018-1024, 2004.
DOI : 10.1016/B978-1-85573-831-7.50171-1

N. Angelidis and P. E. Irving, Detection of impact damage in CFRP laminates by means of electrical potential techniques, Composites Science and Technology, vol.67, issue.3-4, pp.594-604, 2007.
DOI : 10.1016/j.compscitech.2006.07.033

N. Angelidis, C. Y. Wei, and P. E. Irving, The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain, Composites Part A: Applied Science and Manufacturing, vol.35, issue.10
DOI : 10.1016/j.compositesa.2004.03.020

. Sci and . Manuf, 1135?1147, oct, 2004.

K. Almuhammadi, L. Selvakumaran, M. Alfano, Y. Yang, and T. K. Bera, Laser-based surface preparation of composite laminates leads to improved electrodes for electrical measurements, Applied Surface Science, vol.359, pp.388-397
DOI : 10.1016/j.apsusc.2015.10.086

M. Ueda and A. Todoroki, Delamination monitoring of CFRP laminate using the two-stage electric potential change method with equivalent electric conductivity, Engineering Fracture Mechanics, vol.75, issue.9, pp.2737-2750, 2008.
DOI : 10.1016/j.engfracmech.2007.03.011

R. Mills, C. Payne, and E. K. Younsi, Insulation cure monitoring on global VPI large AC motors, Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No.02CH37316), pp.492-496, 2002.
DOI : 10.1109/ELINSL.2002.995982

S. Kobayashi, R. Matsuzaki, and E. A. Todoroki, Multipoint cure monitoring of CFRP laminates using a flexible matrix sensor, Composites Science and Technology, vol.69, issue.3-4, pp.378-384, 2009.
DOI : 10.1016/j.compscitech.2008.10.029

T. Inada and A. Todoroki, « Smart Cure Monitoring Method of Carbon/Epoxy Laminates Using Electric Capacitance Change with Applied Alternating Current Frequency, Key Eng. Mater, vol.297, issue.300, pp.2903-2908, 2005.

L. Huan and . Lee, « The Handbook of Dielectric Analysis and CureMonitoring, 2014.

D. Boll, K. Schubert, C. Brauner, and E. W. Lang, Miniaturized Flexible Interdigital Sensor for <italic>In Situ</italic> Dielectric Cure Monitoring of Composite Materials, Miniaturized Flexible Interdigital Sensor for In Situ Dielectric Cure Monitoring of Composite Materials, pp.2193-2197
DOI : 10.1109/JSEN.2014.2309172

M. J. O-'dwyer, G. M. Maistros, S. W. James, R. P. Tatam, and I. K. Partridge, Relating the state of cure to the real-time internal strain development in a curing composite using in-fibre Bragg gratings and dielectric sensors, Measurement Science and Technology, vol.9, issue.8, p.1153, 1998.
DOI : 10.1088/0957-0233/9/8/002

G. M. Maistros and I. K. Partridge, Monitoring autoclave cure in commercial carbon fibre/epoxy composites, Composites Part B: Engineering, vol.29, issue.3, pp.245-250, 1998.
DOI : 10.1016/S1359-8368(97)00020-6

J. S. Kim and D. G. Lee, Analysis of dielectric sensors for the cure monitoring of resin matrix composite materials, Sens. Actuators B Chem, vol.30, issue.2, pp.159-164, 1996.

G. M. Maistros and I. K. Partridge, Dielectric monitoring of cure in a commercial carbon-fibre composite, Composites Science and Technology, vol.53, issue.4, pp.355-359, 1995.
DOI : 10.1016/0266-3538(95)00007-0

M. Ungarish, R. Joseph, and J. Vittoser, Kenig, « Cure cycle optimization of composites by dielectric measurements, pp.481-486, 1990.

J. H. Choi, I. Y. Kim, and D. G. Lee, Development of the simple dielectric sensor for the cure monitoring of the high temperature composites, Journal of Materials Processing Technology, vol.132, issue.1-3, pp.168-176, 2003.
DOI : 10.1016/S0924-0136(02)00845-2

J. S. Kim and D. G. Lee, Measurement of the Degree of Cure of Carbon Fiber Epoxy Composite Materials, Journal of Composite Materials, vol.30, issue.13, pp.1436-1457, 1996.
DOI : 10.1002/pen.760140312

J. Mijovi?, J. Kenny, A. Maffezzoli, A. Trivisano, and F. Bellucci, The principles of dielectric measurements for in situ monitoring of composite processing, Composites Science and Technology, vol.49, issue.3, pp.277-290, 1993.
DOI : 10.1016/0266-3538(93)90109-T

S. S. Kim, H. Murayama, K. Kageyama, K. Uzawa, and E. M. Kanai, Study on the curing process for carbon/epoxy composites to reduce thermal residual stress, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.1197-1202, 2012.
DOI : 10.1016/j.compositesa.2012.02.023

A. A. Skordos and I. K. Partridge, « Impedance cure and flow monitoring in the processing of advanced composites. », in ICMAC, 2001.

C. Y. Shigue, R. G. Santos, and C. A. Baldan, Monitoring the Epoxy Curing by the Dielectric Thermal Analysis Method, IEEE Transactions on Appiled Superconductivity, vol.14, issue.2, pp.1173-1176, 2004.
DOI : 10.1109/TASC.2004.830477

J. C. Abry, Y. K. Choi, A. Chateauminois, B. Dalloz, G. Giraud et al., In-situ monitoring of damage in CFRP laminates by means of AC and DC measurements, Composites Science and Technology, vol.61, issue.6, pp.855-864, 2001.
DOI : 10.1016/S0266-3538(00)00181-0

O. Ceysson, M. Salvia, and E. L. Vincent, Damage mechanisms characterisation of carbon fibre/epoxy composite laminates by both electrical resistance measurements and acoustic emission analysis, Scripta Materialia, vol.34, issue.8, pp.1273-1280, 1996.
DOI : 10.1016/1359-6462(95)00638-9

D. Pathania and D. Singh, « A review on electrical properties of fiber reinforced polymer composites », Int J Theor Appl Sci, vol.1, issue.2, pp.34-37, 2009.

C. Hill, Investigation of electrical and impact properties of carbon fiber reinforced polymer matrix composites with carbon nanotube buckypaper layers, 2012.

L. Shen, J. Li, B. M. Liaw, F. Delale, and J. H. Chung, Modeling and analysis of the electrical resistance measurement of carbon fiber polymer???matrix composites, Composites Science and Technology, vol.67, issue.11-12, pp.2513-2520, 2007.
DOI : 10.1016/j.compscitech.2006.12.020

E. Sevkat, J. Li, and B. Liaw, A statistical model of electrical resistance of carbon fiber reinforced composites under tensile loading, Composites Science and Technology, vol.68, issue.10-11, pp.2214-2219, 2008.
DOI : 10.1016/j.compscitech.2008.04.011

A. S. Kaddour, F. A. Salehi, S. T. Al-hassani, M. J. Et, and . Hinton, Electrical resistance measurement technique for detecting failure in CFRP materials at high strain rates, Composites Science and Technology, vol.51, issue.3, pp.377-385, 1994.
DOI : 10.1016/0266-3538(94)90107-4

D. Seo and J. Lee, Damage detection of CFRP laminates using electrical resistance measurement and neural network, Composite Structures, vol.47, issue.1-4, 1999.
DOI : 10.1016/S0263-8223(00)00016-7

A. E. Zantout and O. I. Zhupanska, On the electrical resistance of carbon fiber polymer matrix composites, Composites Part A: Applied Science and Manufacturing, vol.41, issue.11, pp.1719-1727, 2010.
DOI : 10.1016/j.compositesa.2010.08.010

D. Abraham and R. Mcilhagger, Glass fibre epoxy composite cure monitoring using parallel plate dielectric analysis in comparison with thermal and mechanical testing techniques, Composites Part A: Applied Science and Manufacturing, vol.29, issue.7, pp.811-819, 1998.
DOI : 10.1016/S1359-835X(98)00048-7

X. Luo and D. D. Chung, Carbon-fiber/polymer-matrix composites as capacitors, Composites Science and Technology, vol.61, issue.6, pp.885-888, 2001.
DOI : 10.1016/S0266-3538(00)00166-4

URL : http://acs.omnibooksonline.com/data/papers/1999_638.pdf

T. Carlson, D. Ordéus, M. Wysocki, and L. E. , Structural capacitor materials made from carbon fibre epoxy composites, Composites Science and Technology, vol.70, issue.7, pp.1135-1140, 2010.
DOI : 10.1016/j.compscitech.2010.02.028

H. Kobayashi, « Electrical impedance change method for moisture absorption monitoring of CFRP, 2004.

Y. Shimamura, T. Urabe, A. Todoroki, and E. H. Kobayashi, Electrical impedance change method for moisture absorption monitoring of CFRP, Advanced Composite Materials, vol.40, issue.451, pp.297-310, 2004.
DOI : 10.2472/jsms.40.464

C. Y. Shigue, R. G. Santos, M. M. De-abreu, C. A. Baldan, A. L. Robin et al., Dielectric Thermal Analysis as a Tool for Quantitative Evaluation of the Viscosity and the Kinetics of Epoxy Resin Cure, Dielectric Thermal Analysis as a Tool for Quantitative Evaluation of the Viscosity and the Kinetics of Epoxy Resin Cure, pp.1786-1789, 2006.
DOI : 10.1109/TASC.2005.869624

T. Joy and W. Strieder, Percolation in a Thin Ply Of Unidirectional Composite, Journal of Composite Materials, vol.9, issue.1, pp.72-78, 1979.
DOI : 10.1103/PhysRevB.15.5733

T. Joy, P. Ajmera, and E. W. Strieder, Effect of Thickness on Single Ply Percolation and Conductivity, Journal of Composite Materials, vol.14, issue.2, pp.130-141, 1980.
DOI : 10.1103/PhysRevB.9.4893

Y. H. Lee and H. C. Kim, Three-dimensional electrical percolation behaviour in conductive short-fibre composites, Journal of Materials Science, vol.41, issue.12, pp.12-3033, 1995.
DOI : 10.1007/BF01209213

P. Marguerès, T. Camps, M. Viargues, and E. P. Olivier, monitoring of the curing of carbon/epoxy composite material for aeronautical and aerospace structures, Measurement Science and Technology, vol.24, issue.9, p.95005, 2013.
DOI : 10.1088/0957-0233/24/9/095005