, IEEE Trans. Microwave Theory Tech, vol.63, issue.2, pp.659-671, 2015.

V. Kuhn, C. Lahuec, F. Seguin, and C. Person, A Multi-Band Stacked RF Energy Harvester With RF-to-DC Efficiency Up to 84%, IEEE Trans. Microw. Theory Tech, vol.63, issue.5, pp.1768-1778, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174288

C. Song, Y. Huang, J. Zhou, J. Zhang, S. Yuan et al., A High-Efficiency Broadband Rectenna for Ambient Wireless Energy Harvesting, IEEE Trans. on Antennas and Propagation, vol.101, pp.3486-3495, 2015.

K. Niotaki, S. Kim, S. Jeong, A. Collado, A. Georgiadis et al., A Compact Dual-Band Rectenna Using Slot-Loaded Dual Band Folded Dipole Antenna, IEEE Antennas Wirel. Propag. Lett, vol.12, pp.1634-1637, 2013.

C. Song, A novel six-band dual CP rectenna using improved impedance matching technique for ambient RF energy harvesting, IEEE Trans. Antennas Propag, vol.64, issue.7, pp.3160-3171, 2016.

Q. Awais, Y. Jin, H. T. Chattha, M. Jamil, H. Qiang et al., A Compact Rectenna System With High Conversion Efficiency for Wireless Energy Harvesting, IEEE Access, vol.6, pp.35857-35866, 2018.

K. Niotaki, A. Collado, A. Georgiadis, K. Sangkil, and M. M. Tentzeris, Solar/electromagnetic energy harvesting and wireless power transmission, Proc. IEEE, vol.102, pp.1712-1722, 2014.

C. H. Lorenz, S. Hemour, W. Liu, A. Badel, F. Formosa et al., Hybrid Power Harvesting for Increased Power Conversion Efficiency, IEEE Microwave and Wireless Components Letters, vol.25, issue.10, pp.687-689, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01322271

X. Gu, S. Hemour, L. Guo, and K. Wu, Integrated Cooperative Ambient Power Harvester Collecting Ubiquitous Radio Frequency and Kinetic Energy, IEEE Transactions on Microwave Theory and Techniques, vol.66, pp.1833-1857, 2014.

A. D. Boaventura, R. Belo, A. Fernandes, A. Collado, N. B. Georgiadis et al., Boosting the efficiency: Unconventional waveform design for efficient wireless power transfer, IEEE Microwave Mag, vol.16, issue.3

A. Costanzo and D. Masotti, Smart Solutions in Smart Spaces: Getting the Most from Far-Field Wireless Power Transfer, IEEE Microwave Magazine, vol.17, pp.30-45, 2016.

J. Bito, R. Bahr, J. G. Hester, S. A. Nauroze, A. Georgiadis et al., A Novel Solar and Electromagnetic Energy Harvesting System With a 3-D Printed Package for Energy Efficient Internet-of-Things Wireless Sensors, IEEE Trans. Microw. Theory Tech, vol.65, issue.5, pp.1831-1842, 2017.

J. Kimionis, Zero-Power Sensors for Smart Objects: Novel Zero-Power Additively Manufactured Wireless Sensor Modules for IoT Applications, IEEE Microw. Mag, vol.19, issue.6, pp.32-47, 2018.

S. D. Assimonis, S. Daskalakis, and A. Bletsas, Sensitive and Efficient RF Harvesting Supply for Batteryless Backscatter Sensor Networks, IEEE Transactions on Microwave Theory and Techniques, vol.64, issue.4, pp.1327-1338, 2016.

G. M. Rebeiz--rf and . Mems, Theory, Design, and Technology, 2003.

H. J. , De Los SANTOS -RF MEMS Circuit Design for Wireless Communications, 2002.

V. K. Varadan, K. J. Vinoy, K. A. Jose--rf-mems, and T. Applications, , 2003.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Bandstop MEMS Filter for Millimeter-Wave Applications, vol.43, pp.675-677, 2007.

C. A. Balanis, Modern Antenna Handbook, pp.455-457, 2008.

C. C. Kilgus, Resonant quadrifilar helix, IEEE Trans. on Antennas and Propagation, vol.17, issue.3, pp.349-351, 1969.

C. C. Kilgus, Multielement, fractional turn helices, IEEE Trans. on Antennas and Propagation, vol.16, issue.4, pp.499-500, 1968.

Z. Popovi?, Cut the cord low-power far-field wireless powering, IEEE Microw. Mag, vol.14, pp.55-62, 2013.

. Ticra, . Copenhagen, and . Denmark,

W. C. Brown, The history of power transmission by radio waves, IEEE Trans. Microw. Theory Techn, vol.32, issue.9, pp.1230-1242, 1984.

S. Ladan, N. Ghassemi, A. Ghiotto, and K. Wu, Highly efficient compact rectenna for wireless energy harvesting application, IEEE Microw. Mag, vol.14, issue.1, pp.117-122, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00786243

N. Zhu, R. W. Ziolkowski, and H. Xin, Electrically small GPS L1 rectennas, IEEE Antennas Wireless Propag. Lett, vol.10, pp.935-938, 2011.

Z. Harouni, L. Cirio, L. Osman, A. Gharsallah, and O. Picon, A dual circularly polarized 2.45-GHz rectenna for wireless power transmission, IEEE Antennas Wireless Propag. Lett, vol.10, pp.306-309, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00692921

Z. Popovi?, E. A. Falkenstein, D. Costinett, and R. Zane, Low-power far-field wireless powering for wireless sensors, Proc. IEEE, vol.101, pp.1397-1407, 2013.

H. J. Visser and R. J. Vullers, RF energy harvesting and transport for wireless sensor network applications: Principles and requirements, Proc. IEEE, vol.101, issue.6, pp.1410-1423, 2013.

H. Sun, Y. Guo, M. He, and Z. Zhong, Design of a high-efficiency 2.45-GHz rectenna for low-input-power energy harvesting, IEEE Antennas Wireless Propag. Lett, vol.11, pp.929-932, 2012.

Y. Suh and K. Chang, A high-efficiency dual-frequency rectenna for 2.45-and 5.8-GHz wireless power transmission, IEEE Trans. Microw. Theory Techn, vol.50, issue.7, pp.1784-1789, 2002.

L. W. Epp, A. R. Khan, H. K. Smith, and R. P. Smith, A compact dual polarized 8.51-GHz rectenna for high-voltage (50 V) actuator applications, IEEE Trans. Microw. Theory Techn, vol.48, issue.1, pp.111-119, 2000.

A. Hagerty, F. B. Helmbrecht, W. H. Mccalpin, R. Zane, and Z. B. Popovic, Recycling ambient microwave energy with broadband rectenna arrays, IEEE Trans. Microw. Theory Techn, vol.52, issue.3, pp.1014-1024, 2004.

B. Strassner and K. Chang, Microwave power transmission: Historical milestones and system components, Proc. IEEE, vol.101, pp.1379-1395, 2013.

T. Yoo and K. Chang, Theoretical and experimental development of 10 and 35 GHz rectennas, IEEE Trans. Microw. Theory Techn, vol.40, issue.6, pp.1259-1266, 1992.

Y. Ren, M. Li, and K. Chang, 35 GHz rectifying antenna for wireless power transmission, Electron. Lett, vol.43, issue.11, pp.602-603, 2007.

N. Shinohara, K. Nishikawa, T. Seki, and K. Hiraga, Development of 24 GHz rectennas for fixed wireless access, URSI Gen. Assemb. Sci. Symp, pp.1-4, 2011.

S. Ladan and K. Wu, High efficiency low-power microwave rectifier for wireless energy harvesting, IEEE MTT-S Int. Microw. Symp. Dig, 2013.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Microwave energy harvesting for satellite applications, Electron. Lett, vol.49, issue.11, pp.722-723, 2013.

A. Collado and A. Georgiadis, 24 GHz substrate integrated waveguide (SIW) rectenna for energy harvesting and wireless power transmission, IEEE MTT-S Int. Microw. Symp. Dig, 2013.

V. Marian, B. Allard, C. Vollaire, and J. Verdier, Strategy for microwave energy harvesting from ambient field or a feeding source, IEEE IEEE Trans. Power Electron, vol.27, issue.11, pp.4481-4490, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00710517

. Microsemi, C. A. Viejo, and U. ,

, RT/duroid®6002 high frequency laminates, MA4E1317, MA4E1318, MA4E1319-1, MA4E1319-2, MA4E2160: GaAs flip chip Schottky barrier diodes, 2013.

, GaAs beam lead detector diodes: Zero bias, Aeroflex Microelectron. Solutions, 2013.

A. E. Segundo and C. A. Usa-[online,

. Feko, S. Stellenbosch, and . Africa,

V. Telecom, V. Melbourne, and A. , Horn antenna: VT220HA20+SK, IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, vol.62, issue.4, 2014.

, LabVIEW System Design Software. Nat. Instrum, 2012.

A. Takacs, H. Aubert, M. Bafleur, J. M. Dilhac, F. Courtade et al., Energy harvesting for powering wireless sensor networks on-board geostationary broadcasting satellites, Proc. IEEE iThinghs, pp.637-640, 2012.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Design and implementation of a rectenna for satellite application, Proc. IEEE WPTC, pp.183-186, 2013.

C. Balanis, Antenna Theory Analysis and Design, 2005.

E. Falkenstein, M. Roberg, and Z. Popovic, Low-power wireless power delivery, IEEE Trans. Microw. Theory Techn, vol.60, issue.7, pp.2277-2286, 2012.

P. W. Hannan and M. A. Balfour, Simulation of phase-array antenna in a waveguide, IEEE Trans. Antennas Propag, vol.13, issue.5, pp.342-353, 1965.

A. Takacs, H. Aubert, S. Fredon, L. Despoisse, and H. Blondeaux, Microwave power harvesting for satellite health monitoring, IEEE Trans. Microw. Theory Tech, vol.62, issue.4, pp.1090-1098, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066227

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Cross dipole rectenna for satellite health monitoring, URSI Conference, 2016.

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Multiband rectenna for microwave applications, IEEE Wireless Power Transfer Conference, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01409598

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Cross dipoles rectenna for microwave applications, pp.3-7, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01409248

H. Sun, Y. Guo, M. He, and Z. Zhong, Design of a high-efficiency 2.45-GHz rectenna for low-input-power energy harvesting, IEEE Antennas Wirel. Propag. Lett, vol.11, pp.929-932, 2012.

A. Takacs, H. Aubert, A. Luca, S. Charlot, S. Fredon et al., Rectenna design for K band application, pp.5-10, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066133

V. Kuhn, C. Lahuec, F. Seguin, and C. Person, A multi-band stacked RF energy harvester with RF-to-DC efficiency up to 84%, IEEE Trans. Microw. Theory Tech, vol.63, issue.5, pp.1768-1778, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01174288

K. Niotaki, S. Kim, S. Jeong, A. Collado, A. Georgiadis et al., A compact dual-band rectenna using slot-loaded dual band folded dipole antenna, IEEE Antennas Wirel. Propag. Lett, vol.12, pp.1634-1637, 2013.

C. Song, Y. Huang, J. Zhou, J. Zhang, S. Yuan et al., A high-efficiency broadband rectenna for ambient wireless energy harvesting, IEEE Trans. Antennas Propag, vol.101, issue.8, pp.3486-3495, 2015.

, RT/duroid ® 6002 high frequency laminates, Rogers Corporation, 2013.

T. Y. Chang and K. Chang, Theoretical and experimental development of 10 and 35 GHz rectennas, IEEE Trans. Microw. Theory Tech, vol.40, issue.12, pp.2359-2366, 1992.

J. Guo and X. Zhu, An improved analytical model for RF-DC conversion efficiency in microwave rectifiers, IEEE MTT-S International Conference, pp.17-22, 2012.

, Skyworks application notes 'mixer and detector diodes

Z. Popovic, E. A. Falkenstein, D. Costinett, and R. Zane, Low-power far-field wireless powering for wireless sensors, Proc. IEEE, vol.101, issue.6, pp.1397-1407, 2013.

Y. Suh and K. Chang, High-efficiency dual-frequency rectenna for 2.45-and 5.8-GHz wireless power transmission, IEEE Trans. Microw. Theory Tech, vol.50, issue.7, pp.1784-1789, 2002.

S. Ladan, A. B. Guntupalli, and K. Wu, A high-efficiency 24 GHz rectenna development towards millimeter-wave energy harvesting and wireless power transmission, IEEE Trans. Circuits Syst. I, Regul. Pap, vol.61, issue.12, pp.3358-3366, 2014.

Y. Ren, M. Li, and K. Chang, 35 GHz rectifying antenna for wireless power transmission, Electron. Lett, vol.43, issue.11, pp.602-603, 2007.

A. Collado and A. Georgiadis, 24 GHz substrate integrated waveguide (SIW) rectenna for energy harvesting and wireless power transmission, IEEE MTT-S International Conference, 2013.

Y. Ren and K. Chang, 8-GHz circularly polarized dual-diode rectenna and rectenna array for microwave power transmission, IEEE Trans. Microw. Theory Tech, vol.5, issue.4, pp.1495-1502, 2006.

W. S. Wong and A. Salleo, Flexible Electronics: Materials and Applications, 2009.

R. Vyas, A. Rida, S. Bhattacharya, and M. M. Tentzeris, Liquid Crystal Polymer (LCP): The ultimate solution for low-cost RF flexible electronics and antennas, Antennas and Propagation Society International Symp, pp.1729-1732, 2007.

, Printing Technology for Flexible Substrates, 2006.

K. Hettak, A. Petosa, and R. James, Flexible plastic-based inkjet printed CPW fed dipole antenna for 60 GHz ISM applications, Antennas and Propagation Society International Symp, pp.328-329, 2014.

A. Bisognin, J. Thielleux, D. Wei-wei;-titz, F. Ferrero, P. Brachat et al., Inkjet Coplanar Square Monopole on Flexible Substrate for 60-GHz Applications, Antennas and Wireless Propagation Letters, vol.13, pp.435-438, 2014.

G. Shaker, . Safavi-naeini, ;. Safieddin, N. Sangary, and M. M. Tentzeris, Inkjet Printing of Ultrawideband (UWB) Antennas on Paper-Based Substrates, Antennas and Wireless Propagation Letters, IEEE, vol.10, pp.111-114, 2011.

A. Chauraya, W. G. Whittow, J. C. Vardaxoglou, R. Yi-li;-torah, and Y. Kai,

S. Beeby and J. Tudor, Inkjet printed dipole antennas on textiles for wearable communications, Microwaves, Antennas & Propagation, IET, vol.7, pp.760-767, 2013.

S. Swaisaenyakorn, P. R. Young, and M. Shkunov, Characterization of ink-jet printed CPW on Kapton substrates at 60 GHz, Antennas and Propagation Conf. LAPC, Loughborough, pp.676-678, 2014.

M. M. Belhaj and . Wei-wei,

E. Pallecchi, C. Mismer, I. Roch-jeune, and H. Happy, Inkjet printed flexible transmission lines for high frequency applications up to 67 GHz, European Microwave Conf., EuMC, pp.1528-1531, 2014.

M. Singh, H. M. Haverinen, P. Dhagat, and G. E. Jabbour, Inkjet printing-process and its applications, Advanced materials, vol.22, issue.6, pp.673-685, 2010.

S. Ahmed, F. A. Tahir, A. Shamim, and H. M. Cheema, A Compact Kapton-based Inkjet Printed Multiband Antenna for Flexible Wireless Devices, Antennas and Wireless Propagation Letters, IEEE, pp.1-1, 2015.

M. A. Aziz and S. Roy,

S. Nariyal and B. D. Braaten, A conformal CPW folded slot antenna array printed on a Kapton substrate, Antennas and Propagation EUCAP, pp.159-162, 2012.

M. M. Jatlaoui, D. Dragomirescu, S. Charlot, P. Pons, H. Aubert et al., 3D heterogeneous integration of wireless communicating nano-sensors on flexible substrate, Proc. SPIE 7821, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00591024

D. Thompson, O. Tantot, . Jallageas, G. E. Hubert;-ponchak, M. M. Tentzeris et al., Characterization of liquid crystal polymer (LCP) material and transmission lines on LCP substrates from 30 to 110 GHz, Microwave Theory and Techniques, IEEE Trans, vol.52, issue.4, pp.1343-1352, 2004.

A. Takacs, H. Aubert, S. Fredon, and L. Despoisse, Design and Characterization of Effective Antennas for K-band Rectennas, Antennas and Propagation EUCAP, pp.1-4, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01237947

M. M. Jatlaoui, D. Dragomirescu, M. Ercoli, M. Krämer, S. Charlot et al., Wireless communicating nodes at 60 GHz integrated on flexible substrate for short-distance instrumentation in aeronautics and space, International Journal of Microwave and Wireless Technologies, vol.4, pp.109-117, 2012.

T. S. Cheung and J. R. Long, Shielded passive devices for siliconbased monolithic microwave and millimeter-wave integrated circuits, IEEE J. Solid-State Circuits, issue.5, pp.1183-1200, 2006.

X. Tang, A. Franc, E. Pistono, A. Siligaris, P. Vincent et al., Performance improvement versus CPW and loss distribution analysis of slow-wave CPW in 65 nm HR-SOI CMOS technology, IEEE Trans. Electron Devices, vol.59, issue.5, pp.1279-1285, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01025022

B. Heydari, M. Bohsali, E. Adabi, and A. M. Niknejad, Low-power mm-wave components up to 104 GHz in 90 nm CMOS' IEEE ISSCC Dig, pp.200-597, 2007.

J. J. Lee and C. Park, A slow-wave microstrip line with a high-Q and a high dielectric constant for millimeter-wave CMOS application, IEEE Microw. Wirel. Compon. Lett, issue.7, pp.381-383, 1920.

T. Dinc, I. Kalyoncu, and Y. Gurbuz, An X-band slow-wave T/R switch in 0.25 µm SiGe BiCMOS, IEEE Trans. Circuits Syst. II, Express Briefs, issue.2, pp.65-69, 2014.

, What is BIM?

S. Kubler, W. Derigent, A. Thomas, and E. Rondeau, Problem definition methodology for the 'Communicating Material' paradigm, IFAC Proceedings Volumes, vol.43, pp.198-203, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00518474

, McBIM research project

J. Jover, Contribution à la réduction des pertes d'informations dans l'industrie du bois: utilisation de la Résonance Quadrupolaire Nucléaire pour l'identification de marqueurs chimiques et de la virtualisation du processus de production pour la détermination de nomenclatures divergentes, 2013.

S. Kubler, W. Derigent, A. , and E. Rondeau, Prototyping of a communicating textile, International Conference on Industrial Engineering and Systems Management, IESM 2011, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00595957

S. Johann, C. Strangfeld, M. Müller, B. Mieller, and M. Bartholmai, RFID sensor systems embedded in concreterequirements for long-term operation, Materials T oday: Proceedings, vol.4, pp.5827-5832, 2016.

. Volume-xx, , p.9, 2017.

M. L. Wilson and S. H. Kosmatka, Design and control of concrete mixtures, vol.5, p.299, 2011.

N. Barroca, L. M. Borges, F. J. Velez, F. Monteiro, M. Górski et al., Wireless sensor networks for temperature and humidity monitoring within concrete structures, Construction and Building Materials, vol.4, issue.0, pp.1156-1166, 2013.

J. Ikonen, A. Knutas, H. Hämäläinen, M. Ihonen, J. Porras et al., Use of embedded RFID tags in concrete element supply chains, Journal of Information T echnology in Construction (ITcon), vol.18, issue.7, pp.119-147, 2013.

S. Alahakoon, D. M. Preethichandra, and E. M. Kanayake, Sensor network applications in structures-a sur v ey, E JSE Special Issue: Sensor Network on Building Monitoring: Fr o m T heory to Real Application, pp.1-10, 2009.

J. W. Matiko, N. J. Grabham, S. P. Beeby, and M. J. Udor, Review of the application of energy harvesting in buildin gs, Measurement Science and T echnology, vol.25, issue.1, p.12002, 2013.

A. Costanzo and D. Masotti, Smart Solutions in Smart Spaces: Getting the Most from Far-Field Wireless P ower T r ansf er, IEEE Microw. Mag, vol.17, issue.5, pp.30-45, 2016.

D. Kim, A. Abu-siada, and A. Sutinjo, State-of-the-art literature review of WPT: Current limitations and solutions o n IPT, Electric Power Systems Research, vol.154, pp.493-502, 2018.

L. Gallucci, C. Menna, L. Angrisani, D. Asprone, R. S. Moriello et al., An E mbedded Wireless Sensor Network with Wireless Power Transm ission Capability for the Structural Health Monitoring of Reinfo rced Concrete Structures, Sensors, vol.17, issue.11, p.2566, 2017.

Y. Jang, J. K. Han, J. I. Baek, G. W. Moon, J. M. Kim et al., Novel multi-coil resonator design for wireless power transfer through reinforced concrete st ructur e with rebar array, Future Energy Electronics Confer en ce an d ECCE Asia (IFEEC 2017-ECCE Asia, pp.2238-2243, 2017.

O. Jonah and S. V. Georgakopoulos, Wireless power transfer in concrete via strongly coupled magnetic resonan ce, I E E E T ransactions on Antennas and Propagation, vol.61, pp.1378-1384, 2013.

A. Okba, A. Akacs, and H. Aubert, 900MHz Miniaturized rectenna, IEEE MTT-S Wireless Power Transfer Conference, pp.3-7, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02066056

A. Okba, A. , and H. Aubert, Compact Flat Dipole Rectenna for IoT Applications, Progress In Electromagnetics Research C, vol.87, pp.39-49, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02067191

, Linear Technology -LTC3105 -4 00 mA St ep-Up DC/DC Converter with Maximum Power Point Co ntr ol an d 2 50 mV Start-Up

, Linear Technology -LTC3108 -Ultralow Volt age St ep -Up Converter and Power Manager

, T exas Instruments -bq25504 Ultra Low-Power Boost Converter With Battery Management for E n ergy Harv est er Applications

, Nippon Chemi-Con -Miniature Aluminum Electrolytic capacitors -LBK Series

, AVX BestCap® Ultra-low ESR High Power Pulse Supercapacitors

, Kemet -Supercapacitors -FM Series

&. St-microelectronics and -. , Murata: LoRa Module Data Sheet

&. St-microelectronics--st-m32l072x8, S. T. St-m32l072xb, and . M32l072xz,

, Semtech -LoRa -SX1276/77/78/79

, T he T hings Network

L. Committee, LoRaWAN 1.1 specification, 2017.

, IEEE Standard for information technology -T elecommunications and information exchange between systems -Local and metropolitan area networks -Specific requirements -Part 15.1: Wireless Medium Access Control (MAC) and Physical layer (PHY) specifications for Wireless Personal Area Networks (WPANs), 2005.

, IEEE Standard for high da t a rate wireless multi-media networks, 2016.

, Low-rate Wireless Personal Area Networks (LR-WPANs), IEEE Standard, vol.15, 2011.

, IEEE Standard for information technology -T elecommunications and information ex ch an ge between systems -Local and metropolitan area networks -Specific requirements -Part 11: Wireless LAN Medium Access Control (MAC) and Physical layer (PHY) specifications, IEEE Std, vol.802, issue.11, 2007.

, IEEE Standard for long wavelength wireless network protocol, IEEE 1902.1 Working Group, 1902.

, QN908x: Ultra low power Bluetooth 5 system-on-c hip solution

. Zigbit-900mhz-wireless and . Modules, Atmel

, Silicon Labs: Zentri AMW036/AMW136

E. T. Si, Electromagnetic compatibility and Radio spectrum Matters (ERM)

, Short Range Devices (SRD) intended for operation in the bands 865 MHz to 868 MHz and 915 M Hz t o 921 MHz; Guidelines for the installation and commissioning of Radio Frequency Identification (RFID) equipm e nt at UHF, 2014.

B. Filali, F. Boone, J. Rhazi, and G. Ballivy, Design and calibration of a large open-ended coaxial probe for the measurement of the dielectric properties of co ncr ete, I EE E T ransactions on Microwave Theory and T echniques, vol.6, pp.2322-2328, 2008.

C. , Travaux de recherche portés sur la conception, la modélisation et la caractérisation fonctionnelle des circuits RF-MEMS (Radio-Frequency MicroElectroMechanicalSystems) en ondes millimétriques dans le cadre de plusieurs projets nationaux (roumains), 2004.

. Iii--activites-d'enseignement,

F. Enseignements-en-electronique-dans-le-cadre-de-la, . Eea, . L3, and . Depuis, , 2011.

, Enseignements en Electronique à INSA Toulouse (vacations, environ 25 heures eq. TD par année) depuis 2014, Niveaux IVème année et Vème année, Depuis 2016 j'interviens dans le cadre du master international ISS dans un cours orienté systèmes IoT pendant mon intervention intitulée 'ENERGY for

, Voir List of publications Citer les cinq publications les plus significatives (titres et noms de tous les autres

A. Takacs, H. Aubert, H. Diez, and D. Belot, Miniaturization of Quadrifilar Helical Antenna: Impact on Efficiency and Phase Center Position, vol.7, pp.202-207, 2013.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Microwave energy harvesting for satellite applications, IET Electronics Letters, vol.11, pp.722-723, 2013.

A. Takacs, H. Aubert, S. Fredon, L. Despoisse, and H. Blondeaux, Microwave power harvesting for satellite health monitoring, IEEE Trans. on Microwave Theory Tech, issue.4, pp.1090-1098, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066227

M. Gastaldi, D. Dragomirescu, A. Takacs, V. Armengaud, and S. Rochette, Micro-strip slow wave line for phase shifting cells, IET Electronics Letters, vol.51, issue.20, pp.1589-1591, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02066180

A. Okba, A. Takacs, H. Aubert, S. Charlot, and P. Calmon, Multiband rectenna for microwave applications, Comptes Rendus Physique, vol.18, issue.2, pp.107-117, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01409598

:. Encadrement, . 100%, and M. Master, Etude et modélisation électromagnétique du transfert d'énergie pour le chargeur inductif' dont j'ai été responsable scientifique

A. Dina and M. Maksoud,

D. Medhat, A. Takacs, and H. Aubert, A methodology to study the electromagnetic behavior of a cryogenic metallic system used to control the ratchet effect, Articles présentés dans des Conférences IEEE (avec actes et comité de lecture) et indexés dans la base de données IEEExplore, vol.23, pp.123-137, 2012.

D. Medhat, A. Takacs, H. Aubert, and J. C. , Comparative Analysis of Different Techniques for Controlling Ratchet Effect in a Periodic Array of Asymmetric Antidots, Proc. of Asia-Pacific Microwave Conference (APMC'2009), pp.1711-1714, 2009.

A. Takacs, D. Medhat, H. Aubert, and J. C. , Electromagnetic Analysis of the Experimental Setup Used to Investigate the Ratchet Effect in Two-Dimensional Electron System Under Microwave Radiation, Proc. of International Semiconductor Conference (CAS'2009), vol.I, pp.337-340, 2009.

A. Takacs, D. Medhat, H. Aubert, and J. C. , A Method for Estimating the Electromagnetic Power Delivered by the Front-End Module used to Investigate the Ratchet Effect in Two-Dimensional Electron Gas System under Microwave Radiation, Proc. of 2010 European Microwave Conference (EuMC'2010), pp.1560-1563, 2010.

D. Medhat, A. Takacs, and H. Aubert, Optimum position of the two-dimensional electron gas sample in the cryogenic metallic cavity system used in studying Ratchet Effect, Proc. of European Microwave Conference (EUMC'2011), pp.964-967, 2011.

, Articles présentés dans des conférences internationales avec actes et comité de lecture, aux workshops et aux symposiums

D. Medhat, A. Takacs, H. Aubert, and J. Portal, Investigation of the metallic cavity influence on the electromagnetic behavior of the setup used in studying the Ratchet Effect, Proc. of Progress In Electromagnetics Research Symposium (Piers'2011), vol.18, pp.107-117, 2011.

, Articles présentés dans de Conférences IEEE (avec actes et comité de lecture) et indexés dans la base de données IEEExplore, vol.1

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Cross dipoles rectenna for microwave applications, Proc. of IEEE WPTC'2016, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01409248

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Multiband Rectenna for microwave applications, Proc. of 2016 European Microwave Conference (EuMC'2016), 2016.
URL : https://hal.archives-ouvertes.fr/hal-01409598

A. Takacs;-a.-okba, ;. H. Aubert, and ;. S. Charlot;-p-f-calmon, Recent advances in electromagnetic energy harvesting and Wireless Power Transfer for IoT and SHM applications, Proc. of 2017 IEEE ECMSM, 2017.

A. Okba, A. Takacs, H. Aubert, A. Bellion, and D. Granena, A Wideband and Compact Circularly-Polarized Rectenna for Low Power Application, Proc. of 2017 IEEE Mediterranean Microwave Symposium (MMS'2017), 2017.
URL : https://hal.archives-ouvertes.fr/hal-01710172

A. Okba, A. Takacs, H. Aubert, S. Fredon, and L. Despoisse, Récupération de l'énergie micro-onde pour l'alimentation de capteurs sans fil à bord des satellites, Proc of JNM'2015, pp.1-5

A. Okba, A. Takacs, and H. Aubert, Rectenna à 2.45 GHz utilisant une antenne à dipôle arrondi, Journées Nationales Micro-ondes (JNM'2017), 2017.
URL : https://hal.archives-ouvertes.fr/hal-01596449

J. , , 2009.

A. Takacs, H. Aubert, P. Pons, T. Parra, and R. Plana, Miniature coplanar bandstop filters for Ka-band applications based on an original Resonant Coupling Irises topology, IET Electronics Letters (IET-former IEE periodical), vol.20, pp.13-5194, 2004.

A. Takacs, D. Lillonga, H. Aubert, J. W. Tao, P. Pons et al., Design of a Broadband WR-to-CPWG Millimeterwave Transition, Microwave and Optical Technology Letters (John Wiley&Sons periodical), vol.43, pp.895-2477, 2004.

D. Dubuc, M. Saadaoui, S. Melle, F. Flourens, L. Rabbia et al., Smart MEMS concept for high secure RF and millimeterwave communications, Microelectronics Reliability, vol.6, pp.26-2714, 2004.

M. Dragoman, A. Takacs, A. A. Muller, H. Hartnagel, R. Plana et al., Nanoelectromechanical switches based on carbon nanotubes for microwave and millimeter waves, Applied Physics Letters, vol.90, pp.3-6951, 2007.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Tunable bandstop MEMS filter for millimeter wave applications, IET Electronics Letters, Issue, vol.12, pp.13-5194, 2007.

A. Takacs, M. Huard, S. Kessler, G. A. Chakam, and E. Lardjane, Estimation of low frequency coverage inside car for passive access system entry, IET Electronics Letters, Issue, vol.12, issue.12, pp.596-597

A. Takacs, N. J. Fonseca, and H. Aubert, Height Reduction of the Axial-Mode Open-Ended Quadrifilar Helical Antenna, IEEE Antenna and Wireless Propagation Letters, vol.9, pp.942-945, 2010.

A. Takacs, H. Aubert, H. Diez, and D. Belot, Miniaturization of Quadrifilar Helical Antenna: Impact on Efficiency and Phase Center Position, vol.7, pp.202-207, 2013.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Microwave energy harvesting for satellite applications, IET Electronics Letters, vol.11, pp.722-723, 2013.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Broadcast energy, IET Electronics Letters, vol.11, p.682, 2013.

, Europe and the future for the WPT, COST Action IC1301 Team (including A. Takacs), vol.18, pp.1527-3342, 2017.

, Papers

A. Takacs, A. Serbanescu, G. Leu, H. Aubert, P. Pons et al., Microwave Passive Circuits Optimization Using Genetic Algorithms, Romanian Journal of Information Science and Technology, vol.7, pp.309-316, 2004.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., A New Topology of Tunable MEMS Filters for Millimeter Wave Systems, MTA review, issue.1/, pp.55-61, 2006.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Design of tunable bandpass MEMS filter for millimeter wave systems, pp.35-4066, 2006.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Tunable bandpass MEMS filter for millimeter wave application: design and results, MTA review, vol.XIX, issue.4, pp.1843-3391, 2009.

D. Medhat, A. Takacs, and H. Aubert, A methodology to study the electromagnetic behavior of a cryogenic metallic system used to control the ratchet effect, Progress In Electromagnetics Research M, vol.23, pp.123-137, 2012.

G. Vigneau, M. Cheikh, R. Benbouhout, and A. Takacs, Design and Modeling of PCB Coils for Inductive Power Charging, Wireless Power Transfer, vol.2, pp.143-152, 2015.

A. Takacs, H. Aubert, D. Belot, and H. Diez, Miniaturization of Compact Quadrifilar Helix Antennas for Telemetry, Tracking and Command Applications, vol.60, pp.125-136, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01238266

Z. Yang, A. Takacs, S. Charlot, and D. Dragomirescu, Flexible Substrate Technology for Millimeter Wave Wireless Power Transmission, Wireless Power Transfer, vol.3, pp.24-33, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02067213

A. Okba, A. Takacs, and H. Aubert, Compact Flat Dipole Rectenna for IoT Applications, Progress In Electromagnetics Research C, vol.87, pp.39-49, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02067191

A. Takacs, P. Pons, H. Aubert, R. Plana, T. Parra et al., Cazaux 'An original micromachined planar Ka Band filter based on a Resonant Coupling Irises topology, Proc of International Semiconductor Conference (CAS'2001), vol.I, pp.0-7803, 2001.

K. Grenier, L. Rabbia, A. Takacs, P. Pons, T. Parra et al., MEMS technology as a contender for the future wireless applications, Proc. of International Semiconductor Conference (CAS'2001), vol.I, pp.0-7803, 2001.

A. Takacs, H. Aubert, P. Pons, T. Parra, R. Plana et al., Resonant Coupling Irises for the Design of New Planar Bandstop Filters, Proc of European Microwave Conference, pp.1-4, 2002.

P. Caudrillier, A. Takacs, O. Pascal, H. Aubert, P. Pons et al., Compact Circularly Polarized Radiating Element for Ka-band Satellite Communications, Proc of IEEE AP-S International Symposium, vol.I, p.66, 2002.

K. Grenier, D. Dubuc, L. Rabbia, A. Takacs, P. Pons et al., MEMS devices for the future wireless applications, Proc. of 4th IEEE International Caracas Conference on Devices, Circuits and Systems (ICCDCS'2002), pp.17-19, 2002.

D. Dubuc, K. Grenier, L. Rabbia, A. Takacs, M. Saadaoui et al., MEMS and MEMS technologies for wireless communications, Proc. of 23rd International Conference on Microelectronics, pp.91-98, 2002.

A. Takacs, D. Lillonga, H. Aubert, J. W. Tao, R. Crampagne et al., Design of a Novel Broadband CPWG-to-WR Transition for Ka-band Satellite Communications, Proc. of International Semiconductor Conference (CAS'2003), vol.I, pp.3-8676, 2003.

J. Kuchenbecker, L. Bary, X. Lafontan, F. Flourens, A. Takacs et al., Microwave and physical behavior of micro-machined structures on membrane for space applications, Proc. of International Semiconductor Conference (CAS'2003), vol.I, pp.105-112, 2003.

A. Takacs, A. Serbanescu, G. Leu, H. Aubert, P. Pons et al., On Layout Optimisation of the Microwave Diplexer Filter using Genetic Algorithms, Proc. of International Semiconductor Conference (CAS'2004), vol.I, pp.4-8748, 2004.

D. Neculoiu, G. Konstantinidis, K. Mutamba, A. Takacs, D. Vasilache et al., Electromagnetic modeling of micromachined GaN thin films for FBAR applications, Proc. of International Semiconductor Conference (CAS'2005), pp.3-5

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Design of Tunable MEMS Filters for Millimeter Wave Systems, Proc. of 13th IEEE Mediterranean Electrotechnical Conference (MELECON'2006), vol.I, pp.6-37756, 2006.

A. A. Muller, D. Neculoiu, A. Takacs, D. Vasilache, F. Giacomozzi et al., Lumped element bandpass micromachined filter design for DCS1800(GSM), Proc. of 13th IEEE Mediterranean Electrotechnical Conference (MELECON'2006), vol.II, pp.6-37756, 2006.

A. Takacs, D. D. Neculoiu, A. Vasilache, . P. Muller, H. Pons et al., Tunable MEMS filters for millimeter wave applications, International Semiconductor Conference Proceedings, CAS'2006, pp.6-8867, 2006.

M. Dragoman, A. Takacs, H. Hartnagel, and R. Plana, RF NEMS switch based on vertical carbonanotube, Proc. of International Semiconductor Conference (CAS'2006), pp.6-8867, 2006.

A. A. Muller, D. Neculoiu, D. Vasilache, A. Takacs, A. Cismaru et al., Micromachined bandpass filter with a new controlled resonance for WLAN 5200 filter applications, Proc. of International Semiconductor Conference (CAS'2006), pp.451-454, 2006.

D. Neculoiu, F. L. Giacomozzi, D. Bary, A. A. Vasilache, B. Muller et al., Compact lumped elements micro-machined band-pass filters with discrete switching for 1.8/5.2 GHz applications, Proc. of International Semiconductor Conference (CAS'2006), pp.107-110, 2006.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., New Topologies of Tunable Bandstop MEMS Filters for Millimeter Wave Applications, Proc of European Microwave Conference (EUMC'2007), pp.126-129, 2007.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., An innovative and versatile topology for tunable bandpass filter, Proc. of International Semiconductor Conference (CAS'2007), vol.I, pp.978-979, 2007.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Tunable Bandstop and Bandpass MEMS Filters for Millimeter Wave Applications, Proc. of European Microwave Conference (EUMC'2008), pp.591-594, 2008.

A. Takacs, M. Huard, S. Kessler, G. A. Chakam, and E. Lardjane, Estimation of magnetic field coverage inside the car for passive access system entry, Proc. of 2009 European Microwave Conference (EuMC'2009), pp.998-1001, 2009.

A. Takacs, N. J. Fonseca, H. Aubert, and X. Dollat, Miniaturization of Quadrifilar Helix Antenna for VHF Band Applications, Proc. of LAPC'2009, pp.978-979, 2009.

N. J. Fonseca, A. Takacs, H. Aubert, and X. Dollat, Design and Experimental Validation of a Compact Quadrifilar Helix Antenna in VHF Band, Proc. of Asia-Pacific Microwave Conference (APMC'2009), p.9, 2009.

A. Takacs, T. Idda, H. Aubert, and H. Diez, Miniaturization of Quadrifilar Helix Antennas for Space Applications, Proc Of 15th International Symposium on Antenna Technology and Applied Electromagnetics (ANTEM), pp.25-28, 2012.

A. Takacs, T. Idda, H. Aubert, and H. Diez, Miniaturization technique for quadrifilar helix antenna, Proc. of IEEE AP-S International Symposium, pp.8-14, 2012.

A. Takacs, T. Idda, H. Aubert, and H. Diez, Compact VHF Quadrifilar Helix Antenna, Proc. of European Microwave Conference (EUMC'2012), 2012.

D. Neculoiu, A. Bunea, P. Calmon, and A. Takacs, 140 GHz Wide-Band Micromachined Double Folded Slot Antenna, Proc. of IEEE APCAP 2012, pp.27-29, 2012.

A. Takacs, A. Bunea, A. Zair, D. Neculoiu, and H. Aubert, Diode Modeling for Millimeter Wave Applications based on Co-Simulation Technique, Proc. of IEEE International Semiconductor Conference (CAS'2012), pp.978-979, 2012.

A. Bunea, D. Neculoiu, P. Calmon, and A. Takacs, Micromachined front-end for 60 GHz Applications, Proc. of International Semiconductor Conference (CAS'2012), pp.978-979, 2012.

A. Bunea, D. Neculoiu, A. Avram, T. Kiuru, T. Vaha-heikkila et al., 160 GHz Silicon Micromachined Folded Slot Antenna Array, Proc. of IEEE APMC 2012, 2012.

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, Design and implementation of a rectenna for satellite application, Proc. of IEEE Wireless Power Transfer Conference (WPTC'2013), pp.15-16

A. Takacs, H. Aubert, L. Despoisse, and S. Fredon, K-band energy harvesting for satellite application, Proc. of IEEE IMS'2013, 2013.

A. Takacs, H. Aubert, S. Fredon, and L. Despoisse, K-band energy harvesting circuits for satellite application, Proc. of European Microwave Conference (EUMC'2013), pp.991-994, 2013.

G. Vigneau, M. Cheikh, A. Takacs, R. Benbouhout, and . Bouguern, Power Source Evaluation of a Wireless Power Transfer System, Proc. of Wireless Power Transfer Conference (IEEE WPTC'2014), pp.9-12, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066244

A. Takacs, H. Aubert, S. Charlot, S. Fredon, and L. Despoisse, Compact Rectenna for Space Application, Proc. of IEEE IMS, pp.1-6, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01875623

A. Takacs, H. Aubert, A. Luca, S. Charlot, S. Fredon et al., Rectenna Design for K Band Application, Proc. of IEEE European Microwave Conference (EUMC'2014), 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066133

A. Bunea, D. Neculoiu, P. Calmon, and A. Takacs, Design and Characterization of a Micromachined Receiver for W Band Applications, Proc. of IEEE European Microwave Conference (EUMC'2014), 2014.
URL : https://hal.archives-ouvertes.fr/hal-02066088

A. Takacs, H. Aubert, S. Fredon, and L. Despoisse, Design and Characterization of Effective Antennas for K-band Rectennas, Proc. of IEEE EUCAP'2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01237947

A. Takacs, H. Aubert, and S. Charlot, Ultra-Compact Ku band Rectenna, Proc. of IEEE IMS'2015, pp.17-22, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01237948

D. Jugieu, G. Vigneau, M. Cheikh, S. Kessler, R. Benbouhout et al., Design and simulation of printed winding inductors for inductive wireless power charging applications, Proc. of IEEE WPTC'2015, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01409595

Z. Yang, A. Takacs, S. Charlot, and D. Dragomirescu, Design of Kapton based passive circuits at microwave frequencies, Proc. of 2015 European Microwave Conference (EuMC'2015), pp.6-11, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02066099

A. Okba, S. Charlot, P. Calmon, A. Takacs, and H. Aubert, Cross dipoles rectenna for microwave applications, Proc. of IEEE WPTC'2016, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01409248

A. Takacs,

D. Dragomirescu,

S. Charlot;-p-f-calmon, Flexible technology for millimeter-wave wireless sensors applications, Proc. of 2017 IEEE ECMSM, 2017.

A. Takacs and ;. Okba,

H. Aubert,

S. Charlot;-p-f-calmon, Recent advances in electromagnetic energy harvesting and Wireless Power Transfer for IoT and SHM applications, Proc. of 2017 IEEE ECMSM, 2017.

A. Takacs, S. Charlot, P. Calmon, and D. Dragomirescu, VHF/UHF Kapton supported antenna for cubesat applications, Proc. of IEEE APS (Antennas and Propagation Symposium, pp.9-14, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02066252

A. Okba, A. Takacs, and H. Aubert, 900MHz Miniaturized rectenna, Proc. of IEEE WPTC, pp.3-7, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02066056

A. Takacs, A. Okba, H. Aubert, D. Granena, M. Romier et al., Compact C-band Rectenna for Satellite Applications, Proc. of IEEE WPTC, pp.3-7, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02066073

A. Okba, A. Takacs, and H. Aubert, Compact Flat Dipole Rectenna for Energy Harvesting or Wireless Power Transmission Applications, Proc. of IEEE APS (Antennas and Propagation Symposium), 2018.
URL : https://hal.archives-ouvertes.fr/hal-02066068

A. Okba, A. Takacs, and H. Aubert, Compact Planar Integrated Rectenna for Batteryless IoT Applications, Proc. of EUMC, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02066082

K. Grenier, R. Plana, T. Parra, P. Pons, L. Rabbia et al., MEMs and Silicon Micromachined Components for Communications systems, Proc. of 8th International Conference on Mixed Design of Integrated Circuits and Systems (MIXDES'2001), pp.23-29, 2001.

K. Grenier, L. Rabbia, P. Pons, A. Takacs, T. Parra et al., Advanced analysis and design methods for RF and millimeter wave MEMS, Proc. of 15th European Conference on Circuit Theory and Design (ECCTD'01), pp.28-31, 2001.

P. Pons, K. Grenier, L. Rabbia, T. Parra, R. Plana et al., Membrane supported circuits for millimetric and sub-millimetric waves-length, Proc. of 26th International Conference on Infrared and Millimeter Waves (IRMMW'2001), pp.10-14, 2001.

A. Takacs, K. Grenier, P. Pons, H. Aubert, R. Plana et al., Nouvelle Topologie de Filtre Micro-usiné Coplanaire pour les Communications en bande Ka, Proc. of 12 -èmes Journées Nationales Microondes, pp.16-18, 2001.

A. Takacs, P. Caudrillier, L. Rabbia, P. Pons, H. Aubert et al., Module de Réception Multimédia Microusiné', 4 -ème Journée d'Electromagnétisme et Micro-ondes de Toulouse (JMET'01), 2001.

H. Baudrand, H. Aubert, P. Caudrillier, J. C. Cayrou, P. Combes et al., Module de Réception Multimédia Microusiné sur Silicium, Electronique Aéronautique et Spatiale', pp.15-16, 2001.

A. Takacs, H. Aubert, T. Parra, P. Pons, R. Plana et al., Filtres planaires à « iris de couplage résonants » pour les télécommunications par satellite, ème Journée d'Electromagnétisme et Micro-ondes de Toulouse (JMET'02), 2002.

A. Takacs, H. Aubert, P. Pons, T. Parra, R. Plana et al., New Planar Bandstop Filters with Resonant Coupling Irises for Satellite Communications Systems, presented at International Workshop on Microwave Filters, pp.24-26, 2002.

A. Takacs, D. Lilonga, J. W. Tao, R. Crampagne, H. Aubert et al., Transition WR 28/CPW à faibles pertes d'insertion en bande Ka, p.29, 2003.

M. Saadoui, P. Pons, K. Grenier, D. Dubuc, R. Plana et al., Low losses Microsystems Technology for mm wave applications, Proc. of 4th Workshop on MEMS for Millimeterwave Communications (MEMSWAVE'2003), 2003.

J. Kuchenbecker, L. Bary, X. Lafontan, F. Flourens, A. Takacs et al., Reliability of Micro-machined Structures on Membrane for Space Applications, Proc. of 4th Workshop on MEMS for Millimeterwave Communications (MEMSWAVE'2003), 2003.

P. Pons, D. Dubuc, F. Flourens, M. Saadaoui, S. Melle et al., MEMS-based redundancy ring for low noise millimeter-wave frontend, Proc. of SPIE Photonics Europe, vol.5455, pp.181-192, 2004.

A. Takacs, H. Aubert, P. Pons, T. Parra, R. Plana et al., A reducing size technique for the planar diplexer filter design based on resonant irises topology, presented at International Workshop on Microwave Filters, pp.13-15, 2004.

A. Takacs, A. Serbanescu, D. Neculoiu, and A. Muller, Electromagnetic Modeling of the Microwave Switches for Communications Systems, the 36 th Int. Symp. of Military Equipment and Technologies Research, pp.681-685, 2005.

A. Takacs, D. Vasilache, C. Tibeica, and D. Neculoiu, A New Topology of RF MEMS Shunt Switch for Reconfigurable Systems Applications, Proc of MEMSWAVE'2005 Workshop, pp.22-24, 2005.

D. Neculoiu, K. Konstantinidis, A. Mutamba, D. Takacs, C. Vasilache et al., Electromagnetic Modeling of GaN FBAR structures, Proc. of MEMSWAVE'2005

. Workshop, , pp.22-24, 2005.

A. Takacs, F. Giacomozzi, G. Konstantinidis, A. A. Muller, I. Petrini et al., Design and Realization of Lumped Components for Micromachined Filter Applications, Proc. of the 16th Workshop on Micromachining, Micromechanics and Microsystems(MME'2005), pp.4-06, 2005.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., A New Topology of Tunable MEMS Filters for Millimeter Wave Systems, Proc of 6th IEEE Communications International Conference (COMMUNICATIONS'2006), pp.291-294, 2006.

A. Takacs, D. Neculoiu, D. Vasilache, A. Muller, P. Pons et al., Tunable Bandstop MEMS Filters for Ka and V-band Applications, Proc. of 8 th International Symposium on RF MEMS and RF Microsystems (MEMSWAVE'2007), pp.26-29, 2007.

A. Takacs, P. Calmon, A. Rumeau, H. Aubert, P. Pons et al., Design and manufacturing of tunable bandpass filter for millimeter wave applications, Proc. of 20th

, Micromechanics Europe Workshop (MME'2009), pp.3-4, 2009.

A. Takacs, T. Idda, S. Aouba, H. Aubert, P. Pons et al., RF modeling and characterization of RF-MEMS switches for reconfigurable reflectarray applications, Proc. of 11th International Symposium on RF MEMS and RF Microsystems (MEMSWAVE'2010), 2010.

A. Takacs, A. Coustou, H. Aubert, and M. Tentzeris, Electromagnetic Analysis of the Near Field Coupling between a RFID Tag and Harness for Aeronautic Applications, Proc. of Progress In Electromagnetics Research Symposium PIERS, pp.20-23, 2011.

D. Jugieu, A. Takacs, M. Cheikh, S. Kessler, and R. Benbouhout, Design and simulation of printed winding inductors for inductive wireless power charging platforms, présentée aux 3èmes Journées Nationales sur la Récupération et le Stockage d'Energie (JNRSE'2013), pp.27-28, 2013.

A. Takacs, H. Aubert, S. Fredon, and L. Despoisse, Conception et Réalisation d'une Rectenna en Bande K pour la Récupération d'Energie Micro-onde à bord des Satellites de Télécommunication Géostationnaires, Proc of JNM'2013, pp.14-17, 2013.

Z. Yang, A. Takacs, S. Charlot, A. Rumeau, and D. Dragomirescu, Technologie pour intégration sur substrat souple dans le domaine millimétrique, Proc of JNM'2015, pp.1-5, 2015.